T60/1p 14", the worlds fastest 4:3 14" laptop!
Posted: Wed Jul 31, 2013 3:36 pm
I present to you, the 14" T60/1p Frankenpad with 15.4" T61p motherboard:
Specifications:
'09 Penryn motherboard from T61p with Middleton BIOS
Intel Core2Extreme X9000
4 GB DDR2 RAM
nVidia Quadro FX570m (4.8K in 3Dmark '06 with a gentle OC)
100 GB @7200 RPM HDD (i should get a SSD, i know)
Intel 5100 WiFi Card (could be better, i know)
14" 4:3 screen with the resolution of 1400x1050
SD Card reader (i haven't cut a hole for it..)
Things that can be upgraded:
HDD => SSD..
WiFi Card.
8 GB RAM
I thought it would be fun to try, and it worked. I had to do a lot of small-scale cutting in the frame, but nothing that really weakened the machine. SO no problem there..
It is hot, however. The Core2Extreme is a Little too much for the thermal system of the T61p. So i will try to decrease the voltage, since the X9000 have unlocked multiplier (i suspect the processor to have a higher voltage than it really needs, to help when using the unlocked multiplier)
I still dont have anything to cover the hole, where the HDD is (and the ultrabay used to be). Any ideas would be appreciated.
It costed me around 600$ to build, everything included. I have a T60P motherboard, 2 GB DDR2 RAM, T60P cooling, T61p structure frame and some minor parts for spare. These could be sold too, to bring the cost further Down!
Pics of the monster:

Note the missing wall here:


Its alive!

The specs:

A post of the laptop inside:

The disk setup:

So thats it. The worlds fastest 14" 4:3 laptop.
Link to build thread: http://forum.thinkpads.com/viewtopic.php?f=29&t=110323
UPDATE; Here is a photosession with my W500, showing the difference in size, ports etc:















I hope you liked it, and i really like my new laptop
Even thought it wont replace my W500.
Specifications:
'09 Penryn motherboard from T61p with Middleton BIOS
Intel Core2Extreme X9000
4 GB DDR2 RAM
nVidia Quadro FX570m (4.8K in 3Dmark '06 with a gentle OC)
100 GB @7200 RPM HDD (i should get a SSD, i know)
Intel 5100 WiFi Card (could be better, i know)
14" 4:3 screen with the resolution of 1400x1050
SD Card reader (i haven't cut a hole for it..)
Things that can be upgraded:
HDD => SSD..
WiFi Card.
8 GB RAM
I thought it would be fun to try, and it worked. I had to do a lot of small-scale cutting in the frame, but nothing that really weakened the machine. SO no problem there..
It is hot, however. The Core2Extreme is a Little too much for the thermal system of the T61p. So i will try to decrease the voltage, since the X9000 have unlocked multiplier (i suspect the processor to have a higher voltage than it really needs, to help when using the unlocked multiplier)
I still dont have anything to cover the hole, where the HDD is (and the ultrabay used to be). Any ideas would be appreciated.
It costed me around 600$ to build, everything included. I have a T60P motherboard, 2 GB DDR2 RAM, T60P cooling, T61p structure frame and some minor parts for spare. These could be sold too, to bring the cost further Down!
Pics of the monster:

Note the missing wall here:


Its alive!

The specs:

A post of the laptop inside:

The disk setup:

So thats it. The worlds fastest 14" 4:3 laptop.
Link to build thread: http://forum.thinkpads.com/viewtopic.php?f=29&t=110323
UPDATE; Here is a photosession with my W500, showing the difference in size, ports etc:















I hope you liked it, and i really like my new laptop