- Posts: 1191
- Joined: Sun Nov 15, 2009 10:09 pm
- Location: Chico, California
As we all know, one of the reasons Thinkpads are so fantastic is because of the way they manage heat, as evidenced by this big photo of the underside of a Thinkpad W700:
Very crude diagram (drawn in Lightshot), but demonstrates precisely what happens to the heat in the W700. All the hot components are in the back of the laptop, and the heat is dispersed over a great volume, and with redundancy between the GPU and CPU. Critically important is that the Hard Drives and Battery are completely isolated from any points of extreme heat. Exceptional engineering for a laptop (although to be fair... they had plenty of space to work with)
Here's the Clevo M980NU, which eventually became the X8100. This was made to rival the king Alienware, the M18x, and it certainly did... It was bigger and carried more gear. 18.4" screen, 3 dedicated 2.5" HDD Bays and a Blu-Ray drive, possible SLI GPU configurations, 10 Macro buttons, etc. Critically, this refined the general cooling setup Clevo came up with in the D901C, which just blasts all the heat rearward. Similar principle to the Thinkpad, but pushes more air to the individual component. Important for isolating the GPUs for servicing and upgrades.
And here's why I posted this topic:
So... you know proper cooling, efficient heat dissipation, isolating components, quietness, etc? The D900T takes a hatchet to all that.
To be fair, the D900T is the first Clevo monster to use a desktop socket CPU (LGA775). So they didn't really have something to look back to and say "hmm... well this didn't work", it was the first time anyone had tried cramming this kind of hardware into that kind of a profile. Although... I'm pretty sure someone at some point would've thought it was a bad idea to sandwich the giant 12-cell battery with both the GPU and the CPU, the two hottest running components in the computer. Also- the GPU is it's own self-contained module beneath the leftmost area of the palmrest, and is mostly Aluminum with copper pipes to the fins. This kept the card (and your palm) VERY hot, usually above 50C regardless of fan speed when the card was being used. Also, that big fan in the middle? It's more shallow than the CPU fans (which are more than an inch thick, btw), but it's only duty really is to woft air onto the 4 RAM bays. It's literally just screwed into that hatch, and is attached to it when you remove it.
I will say however- if you have a tin cup for warm beverages, it's a great idea to keep it to the left of the computer in front of the GPU vent, to keep it toasty.
701C, 760, 770, X24, T30, G41, A31p, T43p, T60/61 Frankie, Z61p, X60 SXGA+, W700ds
and yes. I am a bit of a lunatic.
- Senior Member
- Posts: 702
- Joined: Thu Jul 04, 2013 5:31 pm
- Location: Washington, D.C. , USA
However the noise is just not tolerable cos the fan runs like a jet engine. HP/Dell workstations are noisy as well
I'm still deeply obsessed with the quietness of W701
Big ones: W701 top config T63p QX9300|8G|UXGA T61p dead, please go die as well nVIDIA
Small ones: X61sp P8800X61t SXGA X201 NIB
86 airplane models/ 27 ships/ 21 computers/ 300GB databases/ 0 girlfriend
It's always happier to live in lies and delusions.
- Similar Topics
- Last post
I have to change new one - cooling fan of my X1 carbon
Last post by tyernguyen « Fri Jan 17, 2020 1:22 am
Posted in ThinkPad X1 / X1-Carbon / X1-Extreme and later Seriesby tyernguyen » Fri Jan 17, 2020 1:22 am » in ThinkPad X1 / X1-Carbon / X1-Extreme and later Series
- 0 Replies
- 465 Views
Last post by tyernguyen
Fri Jan 17, 2020 1:22 am
- 24 Replies
- 747 Views
Last post by Vanythe
Sat Feb 22, 2020 11:28 am
- 0 Replies
- 502 Views
Last post by unixed
Tue Aug 27, 2019 5:16 pm
- 0 Replies
- 1460 Views
Last post by 28CarsLater
Tue Oct 22, 2019 8:34 am
Who is online
Users browsing this forum: No registered users and 4 guests