Thinkpads Forum

Strange - works in bios mode only. Smart mode won't set the fan values - tries 10 times and errors out - same result on my z60m. Anyone have better results?

I tried this a while ago and recall having no problem with any mode at all on my a31p (2653-l3g). If you're still interested I can install it again, verify that it works and send you my binaries (or just tell you which version number my binaries have).

Cheers,
Martijn.

P.S. Just wondering: it seems my fan has an increased noise level after or around the time I updated to the latest bios. Any thoughts you can give me on that?

I gave it a try too on my A31 (2652-M5M) and could not get it to work.

But the bigger A31P fan is keeping it cool enough, so I am not too worried.

Marinus

Hi I just fund this nice forum and Tool this week..
and I have to say it works Great

I'm using a A31p P4m 2Ghz
>> running win2K sp4

My setup is :

Level=42 0
Level=54 3
Level=55 7
Level=60 7
Level=70 128

I'm still experimenting but it gives me an off time of about 20min

and I Ignor sensor Bat x7c and that brings me to my querstion what dose the x7c do ? it's allways hot max ist 57° and low is 50°..

cya.

mcblade wrote:Hi I just fund this nice forum and Tool this week..
and I have to say it works Great

I'm using a A31p P4m 2Ghz
>> running win2K sp4

My setup is :

Level=42 0
Level=54 3
Level=55 7
Level=60 7
Level=70 128

I'm still experimenting but it gives me an off time of about 20min

and I Ignor sensor Bat x7c and that brings me to my querstion what dose the x7c do ? it's allways hot max ist 57° and low is 50°..

cya.

Welcome to the Thinkpad Forums

Hmmm, interesting; I am beginning to wonder why it works on some A31s/A31ps but not others.

Neither do I know what the analog of the 0x7C sensor on the A31/p is either. Most of those were found and mapped with a T43, some Thinkpads have less and some have them in different places.