Page 1 of 1

Warning: Can't read Status (possible conflict with other sof

Posted: Mon Aug 27, 2007 6:28 pm
by mattbiernat
Warning: Can't read Status (possible conflict with other software
im using tpfancontrol and get this message. how do i fix this?

MOD EDIT: Thread moved, poster notified.

Re: Warning: Can't read Status (possible conflict with other

Posted: Tue Aug 28, 2007 9:14 pm
by mattbiernat
here is my log:
[8/28/2007 2:51:38 PM] Current Config:
[8/28/2007 2:51:38 PM] Active= 2, Cycle= 5, FanBeep= 0 0, MaxReadErrors= 10
[8/28/2007 2:51:38 PM] IconLevels= 50 55 60, IgnoreSensors= XXX,YYY,ZZZ
[8/28/2007 2:51:38 PM] Levels= 68°C -> 0, 72°C -> 1, 76°C -> 5, 78°C -> 7, 80°C -> 0x80

[8/28/2007 2:51:41 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 2:51:44 PM] Fan: 0x80 / Highest: 69°C (45 36 34 69 50 n/a 33 n/a 35 41 41 n/a)
[8/28/2007 2:51:44 PM] Smart: Set fan control to 0x00, Result: OK
[8/28/2007 4:00:26 PM] Fan: 0x80 / Highest: 59°C (44 32 30 59 50 n/a 29 n/a 29 30 34 n/a)
[8/28/2007 4:00:26 PM] Smart: Set fan control to 0x00, Result: OK
[8/28/2007 4:00:48 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 4:05:37 PM] Fan: 0x00 / Highest: 72°C (50 47 36 72 50 n/a 32 n/a 36 44 45 n/a)
[8/28/2007 4:05:37 PM] Smart: Set fan control to 0x01, Result: OK
[8/28/2007 5:03:03 PM] Fan: 0x80 / Highest: 65°C (50 38 34 65 50 n/a 37 n/a 34 37 40 n/a)
[8/28/2007 5:03:03 PM] Smart: Set fan control to 0x00, Result: OK
[8/28/2007 5:04:42 PM] Fan: 0x00 / Highest: 72°C (54 40 37 72 50 n/a 37 n/a 36 43 45 n/a)
[8/28/2007 5:04:42 PM] Smart: Set fan control to 0x01, Result: OK
[8/28/2007 5:05:18 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:10:23 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:17:51 PM] Fan: 0x01 / Highest: 74°C (57 43 39 74 50 n/a 36 n/a 40 49 49 n/a)
[8/28/2007 5:17:51 PM] Manual: Set fan control to 0x07, Result: OK
[8/28/2007 5:18:58 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:19:53 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:20:23 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:26:53 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:27:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:27:23 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:28:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:33:23 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:39:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:39:33 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:47:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:50:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:51:48 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 5:59:16 PM] Fan: 0x07 / Highest: 73°C (55 42 38 73 50 n/a 35 n/a 41 48 48 n/a)
[8/28/2007 5:59:16 PM] Mode switch: Set fan control to 0x80, Result: OK
[8/28/2007 5:59:18 PM] Fan: 0x80 / Highest: 73°C (55 42 38 73 50 n/a 35 n/a 41 48 48 n/a)
[8/28/2007 5:59:18 PM] Smart: Set fan control to 0x01, Result: OK
[8/28/2007 6:03:43 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:05:08 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:07:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:19:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:21:08 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:22:58 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:27:08 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:37:53 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:38:23 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:38:28 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:44:03 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:45:13 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:46:28 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:48:58 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 6:56:53 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 7:01:13 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 7:09:58 PM] Warning: Can't read Status (possible conflict with other software)
[8/28/2007 7:17:04 PM] Fan: 0x01 / Highest: 74°C (57 44 41 74 50 n/a 36 n/a 43 50 50 n/a)
[8/28/2007 7:17:04 PM] Mode switch: Set fan control to 0x80, Result: OK
now i don't have any other utility running at the same time. i really like tpfancontrol as it lets me to slow down the RPM. can someone plz let me know what is going on?

Posted: Wed Aug 29, 2007 6:47 pm
by Pascal_TTH
Read this topic and use the last revision for T60 (V0.22 svc beta) :

http://forum.thinkpads.com/viewtopic.ph ... sc&start=0

Posted: Wed Aug 29, 2007 8:18 pm
by mattbiernat
Pascal_TTH wrote:Read this topic and use the last revision for T60 (V0.22 svc beta) :

http://forum.thinkpads.com/viewtopic.ph ... sc&start=0
i can only find version 0.18 on the sourceforge.

Posted: Thu Aug 30, 2007 7:40 am
by Pascal_TTH
Read the topic I link. The sourceforge is an *unupdated ballshit* never responding when asking for update...