T23's DVD-drive tray won't close or hold up as closed.
You must place a tape to hold it in the closed position.
- Is there any assembly pictures ? So I can clearly see what is the piece that holds the tray in closed position.
- Is it a easy fix or is it easier to just buy a another CD-drive ?
Is it a normal type/design problem for these kind of CD-DVD-drives ?
- Posts: 10135
- Joined: Sun Jun 04, 2006 1:26 am
- Location: San Jose, CA 95120 USA
I believe that there is a plastic latch inside the drive that keeps the tray closed, although it's been some time since I opened one up. My take is that it is easier to replace the entire unit. You could upgrade to a CD-RW/DVD drive (writes CD-R or CD-RW, in addition to reading both CD and DVD disks) or even to a DVD writer. It does not necessarily have to be an original IBM drive as it is possible to swap the plastic pieces which enable the drive to connect to the IDE interface and allow it to fit inside the Ultrabay.
ref: http://www.kawakami-ca.com/ultrabay_200 ... _checkout/
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 4 guests