T21 Resolution

T2x/T3x series specific matters only
Post Reply
Message
Author
txspaderz
Posts: 2
Joined: Tue May 22, 2007 2:35 pm
Location: Houston Texas

T21 Resolution

#1 Post by txspaderz » Thu Jun 14, 2007 2:23 pm

This is a stupid question I think.

I have a Thinkpad T21. With the resolution set at 1024x768 it fills the screen correctly. When I set the resolution any higher, the screen 'expands' past my lcd. If that makes sense. It expands bigger than my screen, and I have to move my mouse down or up / left or right to show the rest of the screen.

Is there a fix for this?

I've tried updating all my drivers / Savage adapter drivers.

Thanks so much!
Jacob

Msmax
Sophomore Member
Posts: 125
Joined: Sat Nov 18, 2006 2:53 pm
Location: Netherlands

#2 Post by Msmax » Thu Jun 14, 2007 2:37 pm

Your current LCD does not support higher resolutions then 1024x768.

If you like to have higher resolution then you have to replace your LCD.

Msmax

Stargate199
Senior Member
Senior Member
Posts: 708
Joined: Thu Jul 13, 2006 2:51 pm
Location: Atlanta, GA

#3 Post by Stargate199 » Thu Jun 14, 2007 8:13 pm

The LCD is XGA only displaying 1024x768. Since your T21 is not an SXGA+ model (you would have that display if you did), you cannot upgrade to an SXGA+ screen. To do so you will need to get a T21 motherboard with the Savage XI+ video chipset of a T22 or T23 that can support SXGA+ LCD.
I have finally rejoined the dark side.
ThinkPad T450s, Core i7 5600u, 12GB RAM, Samsung 850 EVO 500GB SSD.
Previous ThinkPads: T41, T21, 600E

Msmax
Sophomore Member
Posts: 125
Joined: Sat Nov 18, 2006 2:53 pm
Location: Netherlands

#4 Post by Msmax » Fri Jun 15, 2007 12:13 pm

@Stargate:
Are you sure a motherboard change out is needed?
He can select a higher resolution now, but the LCD is XGA and not SXGA as you say. There for he needs to pan for access to some area's.

I think a LCD and cable change out will be sufficient, correct me if I'm wrong.

Msmax

nikki605
Senior Member
Senior Member
Posts: 612
Joined: Fri Dec 08, 2006 2:39 pm
Location: Tampa, FL
Contact:

#5 Post by nikki605 » Fri Jun 15, 2007 9:25 pm

According to the IBM tawbook, only 6 models of the T21 came with the 14.1" SXGA+ LCD screens:

2647-57U
2647-5AU
2647-5BU
2647-97U
2647-9AU
2647-9BU

Cross-referencing those model numbers to the Hardware Maintenance Manual, all T21's take the same motherboard FRU (12P3366) EXCEPT for models 2647-5xx, 9xx & Cxx, which take motherboard FRU 12P3369. All of the SXGA+ models are either -5xx or -9xx according to tawbook. In the tawbook description for the graphics controller, it says the 5xx/9xx models use the S3 Savage IX8+, and all other models use the S3 Savage IX8.

The motherboard would need to be replaced with FRU 12P3369. My guess would be that they are rare and when you can find one - expensive (if the seller knows what he's got). A quick search on eBay produced 0 results for that FRU. ACS Outlet will sell you one for $190 :o No thanks, I'll pass!
Gary A.

lenovo: T410 (2516-CTO) | i7-620M | 8GB | 320GB 7200rpm | WXGA+ | WiFi 6300 | Bluetooth | Webcam | DVD-RW | 9 Cell | Win7 Pro x64 | Full System Specs
IBM: T21 (2647-47U) | PIII 1GHz | 512MB | 60GB 5400rpm | 3Com Mini PCI Ethernet/56K | DVD-RW | WinXP Pro SP3 | Full System Specs

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T2x & T3x Series”

Who is online

Users browsing this forum: No registered users and 4 guests