T23 Replacing Inductors - How do you take a T23 apart ??

[Big_Bruce]

Hi Guy's. I'm taking my T23 apart so that I can resolder the inductors (system is reving up & down - not booting).

How do you take the system apart to get to the inductors?
I've removed all the system screws, removed the internal
cd burner/drive but the case will still not open up to get to the system board.

Thanks!

[nikki605]

Do you have the hardware maint. manual? It shows you step by step how to remove every part. Keep track of where the screws go so you can put it back together. There are some not-so-obvious screws that have to come out.

Here's the link:

http://www-307.ibm.com/pc/support/site. ... IGR-4UYM3F

[Big_Bruce]

Do you have the hardware maint. manual? It shows you step by step how to remove every part. Keep track of where the screws go so you can put it back together. There are some not-so-obvious screws that have to come out.

Here's the link:

http://www-307.ibm.com/pc/support/site. ... IGR-4UYM3F

Thanks, Nikki! I'll tackle it this weekend!