T series LCD assembly

Message

winslow · #1 Post by **winslow** » Wed Dec 31, 2008 3:23 am

can a LCD assembly from a T23 series mount onto a T21 without dissasembling the whole LCD assy?

winslow · #2 Post by **winslow** » Wed Dec 31, 2008 5:44 am

The answer is yes, very easily, another T series comes back from the dead.

one_jerry · #3 Post by **one_jerry** » Wed Dec 31, 2008 7:30 am

You'd have to dissasemble the lid ONLY if you got one with the built in wireless antennas some T23s had, as they'd have to be removed in a T21. To swap lids you'll need to remove: the keyboards, the hinge covers, the keyboard bezels, the hold down over the LCD connector to the motherboard, the hinges (6 screws). Easy job but study the manual first.
Regards

#4 Post by **RealBlackStuff** » Wed Dec 31, 2008 10:29 am

No problem in swapping a T23-wifi-lid over into a T20/1/2.
You just replace the T20/1/2 modem/NIC combo with a wifi card, and you have a wifi T20/1/2!

sjthinkpader · #5 Post by **sjthinkpader** » Wed Dec 31, 2008 11:30 am

Gain WiFi but giving up wired ethernet card is not much of an upgrade. I would just use an USB or PC Card WiFi NIC.

T series LCD assembly

T series LCD assembly

Who is online