T23 How to wifi in the standard lid

T2x/T3x series specific matters only
Post Reply
Message
Author
simple1
Posts: 15
Joined: Fri Mar 28, 2008 9:08 pm
Location: New Paltz, NY

T23 How to wifi in the standard lid

#1 Post by simple1 » Mon Jan 19, 2009 10:10 pm

I ended up with a half dozen of the T23s with the non wireless lids. Googling around proved that at this point the wired lids were scarce and more expensive than T23s. I wanted to drop a gig of memory in each and make them wireless.

I got some cheap [ebay] antannas from China marked "Hitachi Cable, LTD HT008" and some "Intel PRO/Wireless 2200BG Network" also marked "ANATEL" cards. See picture.

I followed [not exactly, but close (don't need to remove fan)- I've done this a few times before] the IBM HMM:

ftp://ftp.software.ibm.com/pc/pccbbs/mo ... 2p9631.pdf

Nothing too difficult here, if you've opened a box before. The cable is traced just as in the correct lid, the antenne are in the corners, leave about five inches of cable comming out of the monitor. The right antenna is a little towards the hinge because the lid has a raised area in the corner probably for lcd support. There IS enough room between the LCD and the lid for the cable and antanne.

Performance - Well better range and more consistant than the Linksys Wireless-G it replaced.

pros: completely transparent
cons: no modem

I know about the titanium lid construction, the little windows in the correct lid, etc...But I think this may work better that the correct lid. I don't have one to compare.

Sure works a heck of a lot better than an origional airport card in an Apple titanium G4.

Photos:
http://www.frontiernet.net/~toadfarm/P1190033.JPG
http://www.frontiernet.net/~toadfarm/P1070032.JPG
simple1

RealBlackStuff
Admin
Admin
Posts: 17512
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: T23 How to wifi in the standard lid

#2 Post by RealBlackStuff » Tue Jan 20, 2009 8:03 am

Nice you got that working. :)
Because of the titanium in the lid, I've never actually tried converting a standard lid, but put the antennae under the palmrest.
What is the length of those antenna cables that you used?
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

simple1
Posts: 15
Joined: Fri Mar 28, 2008 9:08 pm
Location: New Paltz, NY

Re: T23 How to wifi in the standard lid

#3 Post by simple1 » Tue Jan 20, 2009 12:02 pm

Length of antennas:
overall: 28 & 1/2" - really the antennas are fused and are one unit.
The black one: 24 & 1/2" - shorter at both ends.

I left 5 & 1/2" and 6 &1/2" respectively comming out of the monitor.

simple1

rkawakami
Admin
Admin
Posts: 10053
Joined: Sun Jun 04, 2006 1:26 am
Location: San Jose, CA 95120 USA
Contact:

Re: T23 How to wifi in the standard lid

#4 Post by rkawakami » Tue Jan 20, 2009 5:19 pm

Looks like a shorter lead version of the third one in my T23 comparison from a little over a year ago:

http://forum.thinkpads.com/viewtopic.ph ... 933#338933
http://www.kawakami-ca.com/antenna_comparison/
Ray Kawakami
X22 X24 X31 X41 X41T X60 X60s X61 X61s X200 X200s X300 X301 Z60m Z61t Z61p 560 560Z 600 600E 600X T21 T22 T23 T41 T60p T410 T420 T520 W500 W520 R50 A21p A22p A31 A31p
NOTE: All links to PC-Doctor software hosted by me are dead. Files removed 8/28/12 by manufacturer's demand.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T2x & T3x Series”

Who is online

Users browsing this forum: No registered users and 2 guests