seires of beeps and nothing happens?

T2x/T3x series specific matters only
Post Reply
Message
Author
mwilliwood
Posts: 7
Joined: Tue Jan 26, 2010 5:06 pm
Location: kennesaw, ga

seires of beeps and nothing happens?

#1 Post by mwilliwood » Wed Jan 27, 2010 12:11 am

well now that I am in the right spot!I have a t30 giving me a seires of beeps:one, three,three,one- when first turned on, never boots, stays blank.ffan runs.tried taking the memmory in and out and swapping around,tried with no memmory.the only change i got was no beeps when I moved the stick to the back slot-also tried a diffrent stick of 256 that I had. any ideas?any where to find a glossry of beep codes?kind of got the feeling going towards a bad MB but hoping!thanks in advance!

qviri
ThinkPadder
ThinkPadder
Posts: 1275
Joined: Sat Nov 25, 2006 5:45 pm
Location: Berlin, Germany

Re: seires of beeps and nothing happens?

#2 Post by qviri » Wed Jan 27, 2010 12:40 am

mwilliwood wrote:any where to find a glossry of beep codes?
In the HMM. http://download.lenovo.com/ibmdl/pub/pc ... 2p1840.pdf
X220/IPS, T60p/IPS
Nothing endures but change

RealBlackStuff
Admin
Admin
Posts: 17508
Joined: Mon Sep 18, 2006 5:17 am
Location: Mt. Cobb, PA USA
Contact:

Re: seires of beeps and nothing happens?

#3 Post by RealBlackStuff » Wed Jan 27, 2010 7:02 am

Saw you posts in the other Forum.
Beeping 1-3-3-1 means there is no (or bad) RAM in your laptop.
If the fan is running, your CPU at least is still OK.
Borrow another (known good) 200-pin Sodimm PC2100 or PC2700, any RAM size, and see if that works in either slot.
If not, you'll most likely need another mobo.
Lovely day for a Guinness! (The Real Black Stuff)

Check out The Boardroom for Parts, Mods and Other Services.

mwilliwood
Posts: 7
Joined: Tue Jan 26, 2010 5:06 pm
Location: kennesaw, ga

ok definately the bad connection on memmory....

#4 Post by mwilliwood » Wed Jan 27, 2010 11:07 pm

I kept playing with it and remebered someone saying when they held theres it would load,s held it place and worked,put a spacer behind the cover plate to push on the stick and it is up and running for now,so I know I read on another post where someone explained how to resolider the pins btu can not find it?can someone explain it again to me? thanks so much for saving this old thinkpad! :lol:

Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: seires of beeps and nothing happens?

#5 Post by Harryc » Wed Jan 27, 2010 11:17 pm

Get some liquid soldering flux, a jewelers loupe, and a 40w very fine tipped soldering iron. There are 200 joints per slot to resolder....Read this -
http://www.omskakas.se/2007/08/memory-slot-updates.html

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T2x & T3x Series”

Who is online

Users browsing this forum: No registered users and 4 guests