Page 1 of 1
Is there a model that satisfies these criteria?
Posted: Mon Nov 14, 2011 11:14 pm
by Zak
- Resolution is 1600x1200
- Max RAM is 8gb
- GPU is not ATI rv5xx (e.g. x1400, FireGL v5200, etc...)
Re: Is there a model that satisfies these criteria?
Posted: Mon Nov 14, 2011 11:46 pm
by ThinkRob
Yes, but you'll have to make it yourself. You can make a T60/T61 hybrid that meets those requirements.
I don't think that there are any T61s that shipped in a suitable configuration, but I could be wrong.
Re: Is there a model that satisfies these criteria?
Posted: Tue Nov 15, 2011 12:05 am
by Zak
I don't mind making it myself. I'm assuming the parts I need are, roughly speaking a T60p and a T61 motherboard.
Re: Is there a model that satisfies these criteria?
Posted: Tue Nov 15, 2011 12:24 am
by rumbero
Zak wrote:I don't mind making it myself. I'm assuming the parts I need are, roughly speaking a T60p and a T61 motherboard.
Yes, that is a good point of departure. I also made two T61+ matching your criteria this way.
Here are the main information sources i mainly used for my endeavour:
http://forum.thinkpads.com/viewtopic.php?t=68248
http://forum.thinkpads.com/viewtopic.php?t=51632
http://forum.thinkpads.com/viewtopic.php?t=74413
####
http://forum.thinkpads.com/viewtopic.ph ... 50#p536550 says:
"The PC card connector on the T61 motherboard is female where the T60
motherboard it's male. Need the PC card cage from the T61."
http://forum.thinkpads.com/viewtopic.ph ... 99#p616799
http://forum.thinkpads.com/viewtopic.ph ... 07#p620807 (best description ever!)
http://forum.thinkpads.com/viewtopic.ph ... 99#p555899
Good luck!
Re: Is there a model that satisfies these criteria?
Posted: Tue Nov 15, 2011 10:34 am
by brucehe
I was wondering is there anyway to keep the modem operational with the T60 Frankenpad mod?
Thanks,
Bruce
Re: Is there a model that satisfies these criteria?
Posted: Tue Nov 15, 2011 1:39 pm
by ajkula66
brucehe wrote:
I was wondering is there anyway to keep the modem operational with the T60 Frankenpad mod?
AFAIK, no. But there's a boatload of PCMCIA modem cards sitting all over the globe, if you *really* need one...
Re: Is there a model that satisfies these criteria?
Posted: Tue Nov 15, 2011 3:09 pm
by rumbero
Zak wrote:I don't mind making it myself. I'm assuming the parts I need are, roughly speaking a T60p and a T61 motherboard.
I always opted for two complete machines in order to interchange their respective mainboards, and which in the end resulted in two fully working usable Frankenpads. The T60 machine in a T61 chassis makes a great gift for some younger family member.
