Missing IBMTOOLS and SWTOOLS required for XP installation

T60/T61 series specific matters only
Post Reply
Message
Author
mbmsv
Posts: 5
Joined: Wed Nov 23, 2011 11:47 am
Location: Ottawa, ON Cabada

Missing IBMTOOLS and SWTOOLS required for XP installation

#1 Post by mbmsv » Wed Nov 23, 2011 11:52 am

Hello all,

My old hard drive died and I don't have recovery discs. I was wondering if some kind soul would share these two folders with me. They seem to be required (http://support.lenovo.com/en_US/guides- ... D=UM001359) for installing Windows XP on a new hard drive from scratch.

Your help will be highly appreciated!

Thanks.

jdrou
Senior Member
Senior Member
Posts: 584
Joined: Tue Feb 10, 2009 6:15 pm
Location: Madison Heights, MI

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#2 Post by jdrou » Wed Nov 23, 2011 1:32 pm

Pretty sure everything important in those folders can be downloaded as well (and newer versions). What model do you have?
Current Thinkpads:
X31, X40, X61T, X61, X201, X220 (i7 IPS), W520 (2720QM/2000M/FHD), T440p (i7-4800MQ/GF730GT/FHD)
Dells: Latitude C840, Precision M70, Precision M4400, M6400 (WUXGA), M6600, M6700
Daily driver: Dell XPS 13 w/Kaby Lake+Iris Pro+TB3

mbmsv
Posts: 5
Joined: Wed Nov 23, 2011 11:47 am
Location: Ottawa, ON Cabada

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#3 Post by mbmsv » Wed Nov 23, 2011 1:38 pm

jdrou wrote:Pretty sure everything important in those folders can be downloaded as well (and newer versions). What model do you have?
I have T60 2007. I believe you can find all the drivers, but not some of the utilities. E.g. step 19 in the instructions I mentioned calls for the following:

Apply the PCMCIA Power Policy Registry Patch. To do this, go to either C:\IBMTOOLS\OSFIXES\PCMCIAPW\ or C:\SWTOOLS\OSFIXES\PCMCIAPW\, double-click install.bat.

Thanks.

jdrou
Senior Member
Senior Member
Posts: 584
Joined: Tue Feb 10, 2009 6:15 pm
Location: Madison Heights, MI

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#4 Post by jdrou » Wed Nov 23, 2011 2:31 pm

Do you expect to do wake-on-LAN through a PCMCIA network card in a docking station? That's what that registry fix is for.
Most of the Windows hotfixes are probably no longer relevant with SP3 (which didn't exist when the 60-series was new).
Current Thinkpads:
X31, X40, X61T, X61, X201, X220 (i7 IPS), W520 (2720QM/2000M/FHD), T440p (i7-4800MQ/GF730GT/FHD)
Dells: Latitude C840, Precision M70, Precision M4400, M6400 (WUXGA), M6600, M6700
Daily driver: Dell XPS 13 w/Kaby Lake+Iris Pro+TB3

mbmsv
Posts: 5
Joined: Wed Nov 23, 2011 11:47 am
Location: Ottawa, ON Cabada

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#5 Post by mbmsv » Wed Nov 23, 2011 3:00 pm

jdrou wrote:Do you expect to do wake-on-LAN through a PCMCIA network card in a docking station? That's what that registry fix is for.
Most of the Windows hotfixes are probably no longer relevant with SP3 (which didn't exist when the 60-series was new).
No, I don't think I will need wake-on-LAN... Do you think that's the only thing in those folders that I will be missing? I wish there were updated detailed instructions for installing XP on this machine... I don't want to waste a lot of time on it...

Thanks.

jdrou
Senior Member
Senior Member
Posts: 584
Joined: Tue Feb 10, 2009 6:15 pm
Location: Madison Heights, MI

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#6 Post by jdrou » Wed Nov 23, 2011 5:21 pm

I'd say that you don't really need anything other than the drivers and maybe the .NET framework which you can d/l from MS.
Current Thinkpads:
X31, X40, X61T, X61, X201, X220 (i7 IPS), W520 (2720QM/2000M/FHD), T440p (i7-4800MQ/GF730GT/FHD)
Dells: Latitude C840, Precision M70, Precision M4400, M6400 (WUXGA), M6600, M6700
Daily driver: Dell XPS 13 w/Kaby Lake+Iris Pro+TB3

mbmsv
Posts: 5
Joined: Wed Nov 23, 2011 11:47 am
Location: Ottawa, ON Cabada

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#7 Post by mbmsv » Wed Nov 23, 2011 5:24 pm

jdrou wrote:I'd say that you don't really need anything other than the drivers and maybe the .NET framework which you can d/l from MS.
OK, I will give it a try... Thanks.

Bánh mì
Sophomore Member
Posts: 239
Joined: Sun Aug 15, 2010 2:38 pm
Location: Westminster, California

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#8 Post by Bánh mì » Wed Nov 23, 2011 10:14 pm

They are not needed but include some incremental programs. I'm speaking of the SWTOOLS folder which you should have copied before wiping your old HDD. They however won't prevent you from running a base level Windows install.
Có một ngày tuyệt vời!

mbmsv
Posts: 5
Joined: Wed Nov 23, 2011 11:47 am
Location: Ottawa, ON Cabada

Re: Missing IBMTOOLS and SWTOOLS required for XP installation

#9 Post by mbmsv » Thu Nov 24, 2011 12:13 am

Bánh mì wrote:the SWTOOLS folder which you should have copied before wiping your old HDD.
It wiped itself before I had a chance to copy much.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: iModFrenzy and 6 guests