Ebay t60 Hanging issues.
Posted: Sun Jan 01, 2012 6:18 am
Hey guys. I got a t60 off of ebay... "Tested, Boots to BIOS no hard drive PARTS"
According to ebay they weren't in the wrong sense it was parts and i confirmed it did indeed boot to BIOS just fine. -.-
Tried multiple tested good ( on my desktop they all booted fine) usb/ dvd boot os's. When i try to boot debian/*buntu it hangs at loading casper.. compatibility it gets a little farther usually to where it loads fonts..
Wont even boot freedos XD
Making it even stranger when i boot a hard drive with 7 (installed on a a similar chip set XPS M1330) booting normal..... acts completely fine everything loading..mouse support, everything runs fine, programs are loading as usual then it just hangs randomly Safe mode gets to AGPXXX something(apparently Google sez its a driver bin file and nothing to do with AGP bus )...
I'm stumped ^^;
The only other symptom i'm noticing is the battery isn't charging at all.. posts fine every time.. goes into BIOS no issues. Tried messing with ATAPI compatibility settings and all that.. Am i going to need to re flow something? Not exactly sure where to even begin here.. Any help would be greatly appreciated. Thanks!
Tried multiple tested good ( on my desktop they all booted fine) usb/ dvd boot os's. When i try to boot debian/*buntu it hangs at loading casper.. compatibility it gets a little farther usually to where it loads fonts..
Wont even boot freedos XD
Making it even stranger when i boot a hard drive with 7 (installed on a a similar chip set XPS M1330) booting normal..... acts completely fine everything loading..mouse support, everything runs fine, programs are loading as usual then it just hangs randomly Safe mode gets to AGPXXX something(apparently Google sez its a driver bin file and nothing to do with AGP bus )...
I'm stumped ^^;
The only other symptom i'm noticing is the battery isn't charging at all.. posts fine every time.. goes into BIOS no issues. Tried messing with ATAPI compatibility settings and all that.. Am i going to need to re flow something? Not exactly sure where to even begin here.. Any help would be greatly appreciated. Thanks!