Page 1 of 1
14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 10:32 am
by _65536_kb_sec_
So I'm in a dilemma.
T60p with FireGL and 1440x1050 or regular T60 with 15" IPS screen and Ati X1400?
Anything other than those two parameters don't matter so what do you think?
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 10:57 am
by Raceboy
It depends on the preferances. If you are specifically not looking for the CAD oriented VGA card or 14.1" unit, then I would most definitely go with 15.0 IPS.
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 12:23 pm
by RealBlackStuff
If the T60p with 1400x1050 is a 15" machine, that screen is also IPS.
Only 15" have IPS.
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 12:31 pm
by _65536_kb_sec_
RealBlackStuff wrote:If the T60p with 1400x1050 is a 15" machine, that screen is also IPS.
Only 15" have IPS.
I know that, but for sure it's not IPS. It's just 14.1" SXGA...
Now a new offer came to me - T60p with broken 15" (1600x1200) screen. Would the 15" (1440x1050) would fit, and what would be needed for the replacement? Flashing of the EDID or it's plug'n'play?
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 12:35 pm
by Raceboy
If the 15" SXGA+ came from T6x/R6x then it should be plug'n'play.
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 12:41 pm
by _65536_kb_sec_
Raceboy wrote:If the 15" SXGA+ came from T6x/R6x then it should be plug'n'play.
That's what i needed to hear
Thanks
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Sun Jan 29, 2012 2:45 pm
by Johan
Raceboy wrote:If the 15" SXGA+ came from T6x/R6x then it should be plug'n'play.
... as also discussed in the thread
Turning my 14" T60p into a 15" with FlexView. Possible? - that thread possible also containing other useful information for the OP.
Johan
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Mon Jan 30, 2012 7:32 am
by TuuS
_65536_kb_sec_ wrote:
Now a new offer came to me - T60p with broken 15" (1600x1200) screen. Would the 15" (1440x1050) would fit, and what would be needed for the replacement? Flashing of the EDID or it's plug'n'play?
I have one of these screens in the marketplace if your interested, the price is very reasonable too, or if you want a brand new 1600x1200, realblackstuff is selling some, if you hurry there may still be one left.
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Fri Feb 03, 2012 11:49 am
by _65536_kb_sec_
OK, Finally got a T60p with quite good extras.
Anyway previously it has gotten an 15" (1600x1200) IPS screen which is not working.
Could I replace it with and IPS screen from T43 - 15" 1400x1050, with the chip mod adviced in the other thread.
the exact numbers of the "new" screen are
IDTech N150P3-L01 15" 1400x1050 IPS.
FRU:92P6680
Re: 14.1" T60p or 15.0" IPS T60?
Posted: Mon Feb 06, 2012 2:36 pm
by _65536_kb_sec_
So to finalize the thread:
The screen started working from right after the EDID reflashing.
In my opinion any screen with an EDID chip could be used on a T60/T60p system.
I'm still feeling quite strange because everything worked fine after the first try.
Thanks for the help guys, now I can enjoy my "new" T60p
