XGA Lenovo T60 screen change

[keturkaimis]

Hi all,

I have Lenovo T60 with XGA (1024x768) display. And for me this resolution is to low, I want bigger resolution. Impossible to change XGA display to SXGA or bigger? Or somehow increase XGA display resolution

Thanks for all. (Bad language, because I from Lithuania)

[dr_st]

Welcome to the forum.

Yes, it's possible.

You can get a different, high resolution display, or a whole lid (changing the whole lid is a somewhat simpler process).

If your T60 is 14", you can get SXGA+.

If your T60 is 15", you can get SXGA+ or UXGA. Both of these are nice because they are improvement not only in resolution but also in screen quality - they use IPS panels.

[keturkaimis]

Maybe do u know where can I buy SXGA+ display for 14" T60?

[ZaZ]

You might want to post you're looking for one here in the marketplace forum. Otherwise, eBay is a good option.

[keturkaimis]

http://www.screentekinc.com/Hitachi-TX36D98VC1CAB.shtml

will be good?

[RealBlackStuff]

No, you will need an IBM/Lenovo original part with an IBM/Lenovo P/N or FRU.
Anything else will not work, because it is missing the required (IBM/Lenovo specific) EDID chip.

Other sources: http://www.ebay.de or http://thinkpad-forum.de/forums/16-Biet ... beh%C3%B6r

[keturkaimis]

Oh, okay, but if i change display I need change screen cable? What information about screen cable?

[Neil]

Same cable will work with either panel.

[keturkaimis]

So, 14" SXGA screen will be same panel like 14" XGA? How can I check it?

[Neil]

They will have different part numbers. Check the hardware maintenance manual for the numbers.

[keturkaimis]

1952cc2 what about screen cable? I should change?

[Neil]

No need to change cable.