Page 1 of 1

if swapping mobos is not an option..?

Posted: Thu Apr 05, 2012 2:03 am
by geos
I've read posts about placing 4:3 14" T61(p) mobo into 4:3 15" T60(p) chasis.. Assuming that this is not an option what are possible combinations of swapping existing IPS panels into 14"/15" T6x(p), preferably from other A3x(p), T4x(p), R5x(p), R6x(p) machines originally equipped with IPS panel?

I've read successful story about 15" 4:3 T42/T43 display N150P3-L01 working after EDID reflash with 15" 4:3 T60p: http://forum.thinkpads.com/viewtopic.ph ... P3#p663954

Any others?

thank you,
geos

Re: if swapping mobos is not an option..?

Posted: Thu Apr 05, 2012 7:05 am
by Neil
The problem is...IPS panels only come in 15" 4X3, and no 15" 4X3 T61 machines were ever built. So if you want IPS without swapping motherboards, your only options are to get a 15" 4X3 machine.

Just curious, what model do you have now?

Re: if swapping mobos is not an option..?

Posted: Thu Apr 05, 2012 3:52 pm
by geos
I have three of them: 15" T61p 6460-d8g, 15" T61 6460-D6G and 14" t60p 2008-87G (ie. 15" unfortunately, 15" unfortunately and 14" unfortunately...)

thanks,
geos

Re: if swapping mobos is not an option..?

Posted: Thu Apr 05, 2012 4:35 pm
by RealBlackStuff
ThinkPad T61p (6460-D8G)
T9300(2.5GHz), 2GB RAM, 160GB 7200rpm HD, 15.4in 1920x1200 LCD, 256MB nVIDIA Quadro FX 570M, CDRW/DVDRW, Intel 802.11agn, Bluetooth, Modem, 1Gb Ether, UltraNav, Sec Chip, FPR, Turbo Mem, 6c Li-Ion, WinVista Ultimate 32

ThinkPad T61 (6460-D6G)
T8300(2.4GHz), 2GB RAM, 160GB 5400rpm HD, 15.4in 1680x1050 LCD, 128MB nVIDIA Quadro NVS 140M, CDRW/DVDRW, Intel 802.11agn wireless, Bluetooth, Modem, 1Gb Ethernet, UltraNav, Secure chip, FPR, 6c Li-Ion, WinVista Business 32
The above two are both widescreen, not 4:3.

ThinkPad T60p (2008-87G)
T2600(2.16GHz), 1GB RAM, 100GB 7200rpm HD, 14.1in 1400x1050 LCD, 256MB ATI FireGL V5200, CDRW/DVD, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Secure chip, 9c Li-Ion batt, WinXP Pro
Only this one is 4:3.

No IPS possible in any of those machines.

Re: if swapping mobos is not an option..?

Posted: Thu Apr 05, 2012 5:03 pm
by geos
RealBlackStuff, that was cruel.. ;)

but back to the point. any recommendations for particular numbers for 15" T60(p) and 14" T61(p) if I'd like to buy a few more :eek: to make perfect-and-without-problems mobo swap? 14" t61(p) fits 15" t60(p) but is the opposite also true? (operation: buy two, swap mobos, sell one t61(p) with t60(p) mobo inside)

thank you,
geos

Re: if swapping mobos is not an option..?

Posted: Thu Apr 05, 2012 6:03 pm
by RealBlackStuff

Re: if swapping mobos is not an option..?

Posted: Fri Apr 06, 2012 9:07 am
by TuuS
You can do the two-way swap, buy two computers and end up with two, but a T61 with a T60 board won't sell for much, probably about half what a similar T60 sells for, unless the person doesn't really understand what they are buying. The 4:3 aspect T61 units are rare and desireable because they are the only non-widescreen units that will support 8gb of ram and a Penryn CPU, but if you put a T60 board in it, you remove all that advantage so it's no better then a T60, perhaps worse because the frame has been cut and it no longer has a modem.

I'm not trying to discourage you from doing it, if you wanted to keep and use the computer, then I'd say go for it, but to do it with plans of selling it, you're probably going to be disappointed in what you're able to get for it after all that work. I considered doing the very same thing, but found the parts had much more value then the whole would have, so I only did the swap in one direction.

I will tell you that it's a great combination to put a T61 board in a T60 with IPS.

Re: if swapping mobos is not an option..?

Posted: Tue Apr 10, 2012 3:38 pm
by geos
Thanks guys, you got me thinking and slow down a little. I'd better ask before I buy ;)