Cannot control processor clock via NHC. What is wrong?

[lamalamalama]

Hello,

first thank you for a great site.

I have just upgraded my old T60 14 inches XGA with T7600 to T61 14 inches XGA with T7700 processor. Both Windows 7 32bit. I was used to control the processor clock with Notebook Hardware Control application on the T60. Therefore I was getting either longer battery life or higher performance.

BUT it doesnt work on my present T61. I cannot change the multiplier (FID). Sometimes it changes itself, but I dont see any logical pattern in it. I have also tried other programs, such as RMclock, but with no result.

May I ask, what should I do now to control processor clock?

Thank you very much

Ladislav

[miro_gt]

use throttlestop, RMClock is older and more complicated to setup, therefore you may have missed something.

on second though, check your BIOS to see if Intel SpeedStep Technology is enabled.

[Raceboy]

IBM_ECW also works on Core 2 Duo systems (confirmed working on T400, T60, T61) and it is a very nice program.