Page 1 of 1
Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Fri Apr 05, 2013 1:38 pm
by aothunterpl
Hello Gentlemen I have a problem
I want to replace a damaged LCD cable
My model machine is a IBM T60p type 2007-93G
I have a 15'' LCD 1600x1200 UXGA IPS
my LCD cable model:
ASMP41v9697
P / N 91P6970
-version of blotouch
I need help, .. want to buy a cable that fits my model
Would need to know which specific models / replacement cable fits my LCD
I am planning to purchase a used cable disassembly of the LCD
I learned from one of the vendors that I need at least a minimum of LCD cable from the model SXGA + 1400 x 1050
to work at 1600x1200
how in the truth I do not know ....
Photo my tape cable:
Cable LCD
Regards
Paul
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Fri Apr 05, 2013 5:44 pm
by Johan
Welcome to the forum, Paul!
The cable you need is
91P6985 - see
15 inch LCD service parts - ThinkPad T60, T60p (standard 4:3 screen).
Hint: Try place a "WTB" (Want To Buy) in
The Marketplace in this forum. Another hint; have a look in the
Lenovo (T60) Service and Support Training Vidoes. There are a lot of other very useful videos at Youtube; try Google there for e.g. "T60 LCD repair" etc. By the way, I also suggest you have a look in the thread
[rant] What's wrong with LCD cable FRUs and eBay sellers? and
Install help for HV150UX1-101 LCD - there you will find a bit of useful information, too.
... by the way; I trust you already have the
Hardware Maintenance Manual - ThinkPad T60, T60p (4:3 LCD models)
Johan
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Fri Apr 05, 2013 7:03 pm
by RealBlackStuff
Sorry I disagree!
The correct P/N is 91P6970.
If you see pictures, make sure it has the BlueTooth connector.
The same cable without BT is 91P9650.
Check eBay for ibm 91p6970
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Sat Apr 06, 2013 5:30 am
by aothunterpl
Thank you all for your quick response to my question.
As for the technical manual T60 I have.
As for LCD repair tutorial type I am familiar.
I only needed a hint of matching models of the cable to my LCD
I just do not want to buy a bad model
Yesterday in the search have yet to find a topic:
http://forum.thinkpads.com/viewtopic.ph ... 0p#p693201
.. or else you can add something because I see that in the latter topic
is cable model 91P6985
home at auction Allegro.pl I found:
http://allegro.pl/tasma-matrycy-ibm-thi ... 75430.html
http://allegro.pl/tasma-lcd-ibm-r60-r61 ... 21173.html
The 6969 looks to me from modeling 14.1
but 6985 looks old type, folding the strip similar to my model
Thanks and Regards
Paul
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Sat Apr 06, 2013 4:45 pm
by twistero
91P6985 is the "correct" FRU for a T60 15 inch 4:3 LCD cable as listed in the Hardware Maintenance Manual, but almost all items listed on eBay under 91P6985 are LCD cables for the R60. Instead, T60 cables are often listed under 91P6970 (with bluetooth connector) or 91P6950 (without bluetooth connector), and these FRUs are actually printed on the cables themselves.
By the way, I have one of these cables (without BT) for sale.
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Sat Apr 06, 2013 8:39 pm
by RealBlackStuff
To set this straight once and for all, 91P6970 is the ONLY correct P/N or FRU for a T60/T60p LCD cable for UXGA with BT.
Buy anything else at your own peril!
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Mon May 27, 2013 7:48 am
by aothunterpl
After many expectations at auction in the end I found:
http://allegro.pl/tasma-matrycy-lcd-15- ... 43878.html
ASMP41V9696, 91P6970
I think it would be a good model.
I prefer to be more sure: 0
Because my old tape is labeled ASMP41V96
97
Regards
Re: Problem with replacement damage cable of LCD 15'' IPS UXGA
Posted: Mon May 27, 2013 8:07 am
by RealBlackStuff
I can't read any P/N on that picture, but the shape looks 100% identical to the T60 cables that I use.