Page 1 of 1

Revive a T60p

Posted: Tue Jul 16, 2013 10:10 am
by wackyD
Morning East cost folks and good day to places west and east,


I do what I can to support a mission group in Honduras, including trying to support their IT needs.

I just got a T60p back from them that was working well a few months ago and now is dead.

No status lights flash, no beep codes with ram removed, but the network lights come on (for a half second) and the cd drive is operable when power is depressed (meaning it ejects).

I initially assumed motherboard failure due to misuse, but thought I would post here to see if there are any thoughts of fixing it.


Any ideas?


If I need it, I would probably go to the market for an intel graphics T60 MB or whatever I can find the cheapest. It has good plastics and the screen doesn't appear damaged (though not lit).


Thanks!


Daniel

Re: Revive a T60p

Posted: Tue Jul 16, 2013 10:38 am
by TuuS
It does sound like the board failed since it's getting power and you can't get any beep codes by removing ram. The first thing I'd suspect is a liquid spill, or it could have just been it's time to check out. I have a couple T60 and T60p boards starting at $39 for x1300 ATI to $59 for v5200 FireGL. I don't have any Intel boards, but you might check with ajkula66 or RealBlackStuff.