Thinkpads Forum

Hi, I have a question

Where can I turn for IBM T60 energy saving option when connected to AC power

In the BIOS matches any schematics POWER I set the Maximum Perfomance.

Likewise, in my Win XP SP3 - powering-scheme - maximum performance.

And yet CPU-Z shows only 900MHz

as I start to do something and quickly waving a computer mouse is going to be a max speed of 2.16 MHz

My processor is a T2600


It pisses me off because it cuts through me of the Sound Blaster audigi 2ZS nootebook.

How moving a mouse, the music plays ok without glitches

and do not move the cursor .. crackling interference;]

SB card processor frequency needs 2ZS> 900MHz

I greet

If you are using Windows 7, you can configure the Power profiles to do just that.

Click the "Change Advanced Settings", then go to "Processor Power Management"
There is a setting labeled "Minimum processor state", which different settings for Battery and "Plugged in". Set the "Plugged in" value to 100%. This way the Processor will always be at maximum clock speed when connected to AC power.

Alternatively, you can set it to a value between 60-75%. This way your idle temperatures won't be adversely affected, but still have enough CPU performance to handle the sound card properly.

In my post says I'm using XP sp 3

I tried the card testable at t43 and t42 where it normally work // of the timing prosecor.

It seems that my machine is a problem to use a controller or driver MPCIE

Of course, the SB AUDIGI 2 ZS NOTEBOOK - itself by opinion on Internet forums it seems that she has a problem on some machines

Sorry, was half-asleep when I posted that message, so I probably missed the "XP SP3" part.

You can use utilities like RMClock, Notebook Hardware Control, or IBM_ECW to have greater control over the CPU speed.