Mobo Swap

Message

jronald · #1 Post by **jronald** » Sat Jun 07, 2014 4:26 pm

Had a T60 get dropped, and it will do nothing. Picked up a T60p Mobo with base, and transferred the needed parts. Attempted to fire it up and get nothing but a couple of lights (z and the Batt light). Remove the ram and get 1331, normal. Removed everything else and I dont even get a post beep. No video at all. Never gets to the point to look for a HDD. Pulled the CMOS battery and nada

Im kind of at a lost, this is not my first Goat Rope, been there done that. What am I missing

Ron

#2 Post by **600X** » Sat Jun 07, 2014 4:48 pm

Had the same issue on a T60 X1400 I recently received. Just showed the Z icon and battery icon but no screen. I just switched it off with the power button (press for 10s) and switched it on again afterwards. It worked then. Perhaps you could try the same?

jronald · #3 Post by **jronald** » Sat Jun 07, 2014 4:54 pm

CPU was bad.................................
Never had that happen. It was the only thing left to swap.

Ron

#4 Post by **600X** » Sat Jun 07, 2014 4:57 pm

Same here, dying CPU's are pretty rare, haven't heard of any cases in regards to the T60 series.

But I'm glad you figured it out.

Mobo Swap

Mobo Swap

Re: Mobo Swap

Re: Mobo Swap

Re: Mobo Swap

Who is online