Screen problem on T60 2007-FUG SXGA+ (1400x1050)

[Wiking]

2 days ago noticed small line on the screen. Started suddenly without any strike or anything.
This is IPS model SXGA+ (1400x1500). Today it become like this already.
I don't know the make of the screen.
What should I do now ?
any suggestions ?
https://dl.dropboxusercontent.com/u/155 ... .18.59.jpg

Mod edit: Huge picture, no warning, changed into link. Please read Forum Rule 5!

[ajkula66]

Replace the LCD. That's the only thing you can do.

[Wiking]

For now, I can't find a replace screen for reasonable price.

Sent from my HTC Desire using Tapatalk

[ajkula66]

For now, I can't find a replace screen for reasonable price.

Define "reasonable price" and I might be able to help you out...

[Wiking]

100$ will be great inclusive postage to EU.

[ajkula66]

I'm pretty sure that I can comply...let me check my stash and I'll PM you later in the day.

Stay tuned....

[jronald]

George let me know if you dont have one, Ill check the 2 I have here.

Ron

[Johan]

@ Wiking:

If you're still looking for a new 15" (4:3) SXGA+ Flexview/IPS LCD for your T60, have a look in the thread FS: T60 15" SXGA+ Flexview screens New and used.

My recommendation: Don't wait too long, if you're really seriously interested!

Johan

[ajkula66]

Unfortunately, OP's machine is actually a 14" SXGA+...

ThinkPad T60 (2007-FUG)
T5600(1.83GHz), 1GB RAM, 80GB 5400rpm HD, 14.1in 1400x1050 LCD, 128MB ATI Radeon X1400, CDRW/DVDRW, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 9c Li-Ion batt, WinXP Pro

And no, I wasn't able to help him out so whoever has one of these available please come forward...

[Wiking]

Hi,
So I received a replacement LCD yesterday. It is Samsung LTN141P4-L02 .
My original LCD is from Toshiba (TMD).
After replacing the panel, the Samsung panel not showing picture. I see that the lamp in it works but no image displayed. Tried to reconnect the video cable and inverter but still the same.
Switching back to my TMD and everything works fine.
What do you think? The Samsung LCD is faulty?

Sent from my Nexus 5 using Tapatalk

[TuuS]

It could be that the screen isn't a lenovo, does it have an FRU number on it?

You have to be careful buying screens by manufactures part numbers, if the seller reflashes them with lenovo firmware they will work, but I'd still prefer a lenovo screen.

Also beware of screens that have the fru numbers added, they may work but could be screens that have minor defects that are being passed off as genuine and since new screens haven't been available from regular channels, it can be difficult to find either NOS or a really nice used one.

[Wiking]

This is original lenovo part with fru.
The screen is not new but should be working.
Now, I checked again and saw for a second images on it and this by hitting fn+ f7 several times.

Sent from my Nexus 5 using Tapatalk

[TuuS]

Perhaps you can post a link to photos of the screen?

However, if it's not working then the only two causes that I can think of is it's defective, or it's not really a lenovo and remember that there are many screens sold online that have FRU numbers added and some look remarkably real.

[Wiking]

When I play with the FN+ F7 key few times (function that turns off/on the screen) I see for a half second an image from the screen but then it gone. Checked more than 10 times that everything connected firmly and still same result.

Sent from my Nexus 5 using Tapatalk

[ajkula66]

Switching back to my TMD and everything works fine.
What do you think? The Samsung LCD is faulty?

Most likely.

[Wiking]

[censored], So I'm still with dying screen without replacement.

[ajkula66]

Since the panel you've received was produced for quite a long time, it might have come from a T4x machine, where the EDID chip would be either missing altogether or blank. Such a screen would not display properly on a T6x machine, but the issue - presuming a blank EDID - is a fixable one.

Before you send it back, what is the FRU # ?

[Wiking]

Wow, I'm so .
This is for T40, T41.
FRU 11P8348
IBM 11P8347

[ajkula66]

Yep, that sounds about right.

Is there an EDID chip on the back of the panel? It's a small rectangular chip, size of a cigarette filter or a bit smaller.

[Wiking]

I don't think so.
Checked now and there is no any chip there.

[ajkula66]

Well, back to the seller that one goes, then...

[Wiking]

Thanks for the help. Appreciate this.

Sent from my Nexus 5 using Tapatalk