T61 UXGA LCDs

Message

TheForgottenKing · #1 Post by **TheForgottenKing** » Sun Oct 28, 2018 12:37 pm

I am looking for some UXGA LCDs for my T601 frakenpad, as QXGA seems a bit hard and expensive. There are plenty of 15" UXGA LCDs on eBay for cheap, but I know those need EDID flashing. Can someone direct me towards the correct LCD, or an LCD that can be flashed?

I am also wondering if a 14" UXGA LCD exists

ajkula66 · #2 Post by **ajkula66** » Sun Oct 28, 2018 12:46 pm

TheForgottenKing wrote: ↑
Sun Oct 28, 2018 12:37 pm
I am looking for some UXGA LCDs for my T601 frakenpad, as QXGA seems a bit hard and expensive. There are plenty of 15" UXGA LCDs on eBay for cheap, but I know those need EDID flashing. Can someone direct me towards the correct LCD, or an LCD that can be flashed?

Hydis HV150UX1-100 FRU 13N7076

ID Tech N150U3-L01 FRU 42T0345

These were the stock options on T60p and work OOTB.

I am also wondering if a 14" UXGA LCD exists

Yes, but it's not an IPS panel. I believe that it a Sharp screen used in a Dell laptop from PM era, but am not 100% certain.

#3 Post by **RealBlackStuff** » Sun Oct 28, 2018 12:54 pm

For the best possible UXGA in a 15" T60/T601/R60/R61, see https://www.theboardroom.info/led_mods2.html

PS: No EDID flashing required on those!

ajkula66 · #4 Post by **ajkula66** » Sun Oct 28, 2018 1:09 pm

RealBlackStuff wrote: ↑
Sun Oct 28, 2018 12:54 pm
For the best possible UXGA in a 15" T60/T601/R60/R61, see https://www.theboardroom.info/led_mods2.html

PS: No EDID flashing required on those!

Indeed.

However, the OP did state "cheap"...and that's not going to happen with this screen that both of us know and love...

wujstefan · #5 Post by **wujstefan** » Sun Oct 28, 2018 4:41 pm

ajkula66 wrote: ↑
Sun Oct 28, 2018 1:09 pm
However, the OP did state "cheap"...and that's not going to happen with this screen that both of us know and love...

Well, this is not entirely true now

it costs now $75-100, I have sourced 5 last month, new. These made me get back to the old good 4:3 series

TheForgottenKing · #6 Post by **TheForgottenKing** » Mon Oct 29, 2018 7:25 am

That's pretty expensive. Might try to post on the forums here.

wujstefan · #7 Post by **wujstefan** » Mon Oct 29, 2018 7:42 am

Well not so long ago getting them under $250 was a challenge

Try Sharp screen w/ ASV. Not ips, not the best color reproduction but a decent screen overall (and cheap).

#8 Post by **RealBlackStuff** » Mon Oct 29, 2018 7:54 am

wujstefan wrote: ↑
Sun Oct 28, 2018 4:41 pm
I have sourced 5 last month, new. These made me get back to the old good 4:3 series

Who does your LED-mods, if I may ask?

TheForgottenKing · #9 Post by **TheForgottenKing** » Mon Oct 29, 2018 9:06 am

At the moment I have an SXGA+ IPS display. If I can't find a UXGA panel, I might just replace the CCFL for now. Would any generic 1600x1200 TN panel work, assuming the EDID can be flashed?

ajkula66 · #10 Post by **ajkula66** » Mon Oct 29, 2018 9:27 am

TheForgottenKing wrote: ↑
Mon Oct 29, 2018 9:06 am
. Would any generic 1600x1200 TN panel work, assuming the EDID can be flashed?

Only if the pinout is matching, otherwise you'll blow a fuse on the board.

TheForgottenKing · #11 Post by **TheForgottenKing** » Mon Oct 29, 2018 11:35 am

Alright, going to stay with SXGA+ for now, until the rest is done. T9300/570m board on the way.

T61 UXGA LCDs

T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Re: T61 UXGA LCDs

Who is online