Page 1 of 1
T60 gets stuck on the startup logo for a bit
Posted: Wed Feb 19, 2020 12:20 pm
by kyletv05
My T60 takes awhile to get past the startup logo. It takes like 10-20 seconds? That doesn't seem right to me. I've went into the BIOS and I'm sure the boot mode is "quick", and I don't have the extended memory test enabled. My RAM setup is 2x2GB, and I'm on the latest BIOS version.
Re: T60 gets stuck on the startup logo for a bit
Posted: Wed Feb 19, 2020 3:23 pm
by dr_st
Any devices plugged in (USB or others)? If so, try unplugging them.
Re: T60 gets stuck on the startup logo for a bit
Posted: Thu Feb 20, 2020 12:32 am
by theterminator93
My T601F's BIOS settings are the same, and despite that, it still does an extended memory test (at least for the first 3 GB of the installed RAM) which takes 20 seconds or so like you describe. If you press ESC during the POST logo, is it doing the memory test?