HDMI to USB cable recommendations - please

[ap63]

Hi Everyone,

I just updated and reinstalled my T61 to RHEL 8.8
Note: Linux 9 didn't work - at least RHEL 9.3 didn't, bites the dust even before you get to choose the OS.
Also changed the nic card and went through the Middleton BIOS update.
All good so far but I'd like to also use my 28" Samsung HDMI monitor with it.
First question - any recommendations on cables? I'm assuming pretty much any standard HDMI to USB cable should work
Second - anyone try this with Linux?

Thanks in advance

[SAIYAN48]

USB 2 won't have enough bandwith for a good output with HDMI.

[dr_st]

USB 2 won't have enough bandwith for a good output with HDMI.

Indeed. The options are either a VGA-to-HDMI active converter, or a docking station, and then an HDMI-to-DVI adapter.

However, it depends on the resolution of the 28" monitor. If it is more than 1920x1200, then even from DVI a direct adapter won't work.

[axur-delmeria]

There's another option, though a bit excessive: external GPU setup either through the expresscard slot or the PCIe slot on the Advanced Dock (Type 2503).

[ap63]

Thanks all for the response. Active adapter ordered and is arriving today. - I'll update once I try it out.

[ap63]

The adapter worked like a charm - right out of the box.

In case anyone else runs into this issue here's what purchased:

FOINNEX VGA to HDMI Adapter Converter with Audio,(PC VGA Source Output to TV/Monitor with HDMI Connector), Active Male VGA in Female HDMI 1080p Video Dongle adapter for Computer,Laptop,Projector

Here's the link - hope I'm not violating any rules by post the link on Amazon ($12)
https://www.amazon.com/dp/B07121Y1Z3?sm ... gToDp&th=1

Thanks again.