T60p 14,1 and different display

T60/T61 series specific matters only
Post Reply
Message
Author
festher
Freshman Member
Posts: 73
Joined: Sun Apr 23, 2006 12:56 pm

T60p 14,1 and different display

#1 Post by festher » Sun Apr 30, 2006 4:29 am

as far as i understand there are several different screens on the same T60 models (Samsung, BOE-Hydis, TMD) ?

im looking to buy a T60P 14,1 (no feexview) so a good display might be eneven more important than with flexview. so which one is best and do we have any options to pick which one we like best when ordering?

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

#2 Post by hoya » Mon May 01, 2006 5:05 am

welcome to the forums!

unfortunately, there is no way to choose which panel you will receive, but the odds are most likely that you will receive a Hydis panel, based on what I have seen on these forums and elsewhere.

fortunately, all of the 14.1" SXGA+ panels are very similar so you should be happy to matter which you receive.

remember to run the cleartype tuner applet (download from microsoft) and you might want to enlarge the DPI if you are not accustomed to a high resolution display.

ibm meister
Freshman Member
Posts: 78
Joined: Sat Apr 22, 2006 12:02 am
Location: East Coast

Display Woes 14.1

#3 Post by ibm meister » Wed May 03, 2006 7:47 pm

I sent back my d6u with a great display because of the dvd issue in previous thread/ I only found the answer after I sent it back... my replacement has a different mfr. screen, and it is NOT as bright and has slightly , slightly dark shadows in the lower corners, hardly noticable but since this is my 4th return in 4 monthe trying to get a fully functional think pad, I will probably send this one back too. Spoke to rep today and he said if I am not happy send er in. Question is... what will I get next?????

Lenovo consistancy does not exist but I still stick with Think Pads

hoya
Senior Member
Senior Member
Posts: 670
Joined: Fri Aug 05, 2005 8:01 pm
Location: Washington, DC

Re: Display Woes 14.1

#4 Post by hoya » Thu May 04, 2006 6:33 am

ibm meister wrote: my replacement has a different mfr. screen, and it is NOT as bright and has slightly , slightly dark shadows in the lower corners
do you know the manufacturer of the two screens from your D6U's? if you have the serial numbers I can do a parts lookup if you haven't already.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: el-sahef and 24 guests