System update Vs Software installer

T60/T61 series specific matters only
Post Reply
Message
Author
Asus1980
Posts: 7
Joined: Tue Aug 15, 2006 2:51 am
Location: Israel

System update Vs Software installer

#1 Post by Asus1980 » Thu Aug 17, 2006 5:12 am

Hi, can anyone please explain what is the differance between them and why they both are not working good ??
I don't get why Lenovo needed to release System update instade of making Software installer work better ??

System update seem to find updates that Software installer can't find and clockwise.

Please shade some light for me..

As

unitedunited
Posts: 32
Joined: Sat Jul 29, 2006 11:08 pm
Location: NYC

#2 Post by unitedunited » Thu Aug 17, 2006 11:51 am

there was another thread on this a couple weeks ago. basically, the cut-off date for updates that can be located/downloaded by Software Installer is mid-july, when System Update officially debuted. I suppose SU might have been written to not find any updates older than a certain date as well. What i would do is use SI, then go to the driver updates page and manually download/install anything updated after mid-july.
unitedunited
reluctant networker
T42p (2 GB RAM) + Win XP Pro SP2

tpribors
Sophomore Member
Posts: 164
Joined: Fri Feb 10, 2006 2:44 pm
Location: Las Vegas, NV

#3 Post by tpribors » Thu Aug 17, 2006 12:27 pm

I just checked for updates and got two from Software Update (the Rescue and Recovery update and hotkey manager) and one from Software Installer (Power Manager.). Extremely inconsistent.

wpwood3
Freshman Member
Posts: 118
Joined: Tue Mar 07, 2006 8:55 pm
Location: Atlanta
Contact:

Software Installer is going away

#4 Post by wpwood3 » Thu Aug 17, 2006 10:42 pm

There's more info here: http://www-307.ibm.com/pc/support/site. ... OFT-UPDATE

Basically it says "Software installer is being replaced by System Update 2.0. Software installer is still available at this time to allow you to transition to System Update 2.0."
Bill
WP3 Photography
TP T60
TP 600
TP 760XD

brsnyder
Freshman Member
Posts: 59
Joined: Sat Aug 12, 2006 8:05 pm
Location: California USA

#5 Post by brsnyder » Fri Aug 18, 2006 8:43 pm

I just downloaded what looked like a Rescue and Recovery update, and supposedly installed it, but when I run R&R it's the same version number. Am I missing something? (This is on a brand new machine.) The version I have is 3.01.0037.00. The file I downloaded and ran is tvtrnr31_1022en.exe.

Thanks -- Barbara

sw-rick
Posts: 26
Joined: Mon Apr 10, 2006 1:58 am
Location: Norway

#6 Post by sw-rick » Sat Aug 19, 2006 4:13 am

Just had a rather bizarre hang-up with the System Update here ...
Yesterday I installed Zonelabs firewall and gave all the programs the right permissions to access the internet. After I performed a System Update, and it immediately downloaded some packages. After about 5% download it stops to tell me that it needs to update itself (system update) and that it needs to restart. I press OK ... all windows for system update dissappears. A few seconds later I receive an alert from the firewall that it just blocked a package going from my localhost to my localhost (loopback on the network card). System update refuses to go on ....

Even after I start system update again (with the firewall off), it reaches this 5% and says it needs to restart. But nothing happens.

I finally did end up restoring a backup from a few days back, and perform the system update again. The same happens, but this time it actually is able to restart itself. Strange ...

So it seems this software is a bit buggy ... If it happens again I am seriously considering uninstalling it and do my updates manually.

Cheers,
SW-Rick
2007F4G has arrived!

Nick Y
Junior Member
Junior Member
Posts: 438
Joined: Tue Feb 14, 2006 2:17 pm
Location: Bucks., UK

#7 Post by Nick Y » Sat Aug 19, 2006 5:49 am

I have had problems with Software Update for the last few weeks (-haven't we all!) It kept stopping after about 9% and saying 'Exception Not Expected was encountered!'

I discovered today that the reason I was having a problem was that I am using a proxy for the net connection. Remove the proxy, via control panel/ internet options and it works. (Mind you, it still tries to download out of date s/w!)

S/W Update did do a self-update, first time I finally got it working.

All I have to do now is remember to remove the proxy when I want to run it, then restore proxy for normal use.

Nick
IBM ThinkPad T43-2668-F5G,
T41p-2373-GEG & a T61-6466-9YG

KawaiDon
Posts: 16
Joined: Sat Aug 19, 2006 1:26 pm
Location: Southern California

#8 Post by KawaiDon » Sat Aug 19, 2006 4:24 pm

sw-rick wrote:.......Zonelabs firewall and gave all the programs the right permissions to access the internet. ......A few seconds later I receive an alert from the firewall that it just blocked a package going from my localhost to my localhost (loopback on the network card). System update refuses to go on ....
Rick,

This is because your firewall no longer recognizes the updated software. Norton Firewall did this to me also. Have your firewall search for software again, or manually add the software to your firewall rules, and it will work again.
Don Mannino
T2500(2GHz), 2GB RAM, 100GB 7200rpm HD,
15in 1600x1200 LCD, 256MB ATI FireGL V5200, WWAN, 9c Li-Ion batt

Porsche
Freshman Member
Posts: 55
Joined: Fri Apr 30, 2004 9:25 am

System Update 2.0

#9 Post by Porsche » Tue Aug 22, 2006 8:15 am

Will this System Update program allow the end users to choose which updates to install, like the Software Installer program?

Nick Y
Junior Member
Junior Member
Posts: 438
Joined: Tue Feb 14, 2006 2:17 pm
Location: Bucks., UK

Re: System Update 2.0

#10 Post by Nick Y » Tue Aug 22, 2006 9:03 am

Porsche wrote:Will this System Update program allow the end users to choose which updates to install, like the Software Installer program?
Yes.
IBM ThinkPad T43-2668-F5G,
T41p-2373-GEG & a T61-6466-9YG

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: 91011 and 5 guests