Page 1 of 1
v5200 issues
Posted: Thu Sep 21, 2006 8:00 pm
by ennma
Hello All:
I compared the gpu clock and mem clock on my ati catlyst with a friend of mine, and here are the specs
mine
core 128mhz
mem 130mhz
friends
core 398mhz
mem 328mhz
now this is bad ain't it how do I fix this
thanks
Problems with V5200
Posted: Thu Sep 21, 2006 11:27 pm
by rosemarycane
Are you comparing two T60Ps? If not the V5200 on the T60 could be clocked differently. It also might have to do with ATI Powerplay. Were you both plugged in at the time?
Check your ATI Settings, that would be a start at least.
u
Posted: Fri Sep 22, 2006 1:18 am
by maximus_
What is your friends system and card?
Posted: Fri Sep 22, 2006 1:19 am
by ennma
yup both t60p plugged and checked power play, moving the scale in powerplay doesnot changes the core or memory clock one hertz
thanks
Posted: Fri Sep 22, 2006 2:09 am
by maximus_
What were you using to deterime the GPU and Mem clock rates. Also are both the exact same models? Even the GL 7800 in my A31p Clocks at 258.75 Core and 182.25 mem. see that attached screen shot.. I'm using Radlinker and is by BIOS default. I'd attach the screen shot but I'm not sure how.[/img]
Posted: Fri Sep 22, 2006 5:31 am
by testthings
I don't use power play.
Try to change your power scheme to maximum performance. It would run in 400/330 MHz