Page 1 of 1
LCD do not resume after i moved the mouse.
Posted: Tue Oct 24, 2006 2:38 am
by kccheng
Hello,
seems it happens on battery power only, when the LCD goes blank, it usually take a button or mouse move to bring it alive again. but in my T60 it doesn't work all the time. it happened around 5 times so far.
I found that a system stand by->resume (fn+f4) will bring the lcd back to life.
any other see this problem?
Posted: Tue Oct 24, 2006 7:43 am
by wareynolds
I also have the same problem. Have not really determined the cause.
Posted: Tue Oct 24, 2006 8:11 am
by kccheng
i found this in windows support but it doesn't mean too much to us.
http://support.microsoft.com/kb/283270/en-us
Posted: Tue Oct 24, 2006 9:15 am
by snessiram
Is it just the screen that goes off or is your computer going into sleep? (as on battery mode, it's possible that after x minutes the pc goes into sleep while on adapter it just turns off the lcd)
Posted: Tue Oct 24, 2006 10:48 am
by kccheng
i am sure the system is alive except the lcd, as I can access the nb's files using network share. caplocks sound works too
Posted: Tue Oct 24, 2006 11:34 am
by RonS
You're probably seeing the Microsoft bug described here:
http://support.microsoft.com/KB/917332
The patch is available by requesting the file from MS's web site, or here:
http://hf.xable.net/
Posted: Tue Oct 24, 2006 8:12 pm
by kccheng
hi,
this KB patch looks fit to my problem. I've installed it and did a few LCD flipping, it is OK so far.
thanks for your information.