Page 1 of 1

t60p: Extremely low 3d mark score

Posted: Fri Apr 13, 2007 1:11 pm
by abu_sme
I can't remember the exact score but I believe I got 700 on the low and 300 on the high. This is attrociously bad, yet, I can run any games that I want at full resolution and I experience almost no problems.

Anybody know what could be the problem?

Posted: Fri Apr 13, 2007 1:17 pm
by gator
3dmark 2005 or 2006? What is your model and what are the specs?

Posted: Fri Apr 13, 2007 1:24 pm
by abu_sme
2006

T60p 2007-8ju
c2d t7600 2.33ghz
1gig ram
FireGL v5250
100gb 7200

Posted: Fri Apr 13, 2007 1:43 pm
by gator
That is strange ... did you check that the machine was:

1. not on battery?
2. not running at balance/optimal performance (in power manager ... these settings throttle the CPU speed)?
3. at ATI powerplay was at max performance setting?

Posted: Fri Apr 13, 2007 4:15 pm
by abu_sme
gator wrote:That is strange ... did you check that the machine was:

1. not on battery?
2. not running at balance/optimal performance (in power manager ... these settings throttle the CPU speed)?
3. at ATI powerplay was at max performance setting?

1) Plugged in
2) Running on optimal power settings
3) DOH!, it was set for optimum battery!

I did fix it and got marginal improvement with an overall score of 1700 or so. I don't remember, but it wasn't so good.

I've installed the omega drivers, I haven't had a chance to do a benchmark, but once I get back to AC power I will give it a shot.

Edit: It runs cooler to boot too! 5 hours battery left at 90%! I hope that that it automatically switches to a more aggressive power profile automatically, I have already configured the thing enough today and I am going to get bleeding fingers if I do that too much

3DMark Score 1588 3DMarks
SM2.0 Score 560
HDR/SM3.0 Score 574
CPU Score 1989


Not too bad

Posted: Sat Apr 28, 2007 2:25 am
by codek
abu_sme wrote:
gator wrote:That is strange ... did you check that the machine was:

1. not on battery?
2. not running at balance/optimal performance (in power manager ... these settings throttle the CPU speed)?
3. at ATI powerplay was at max performance setting?

1) Plugged in
2) Running on optimal power settings
3) DOH!, it was set for optimum battery!

I did fix it and got marginal improvement with an overall score of 1700 or so. I don't remember, but it wasn't so good.

I've installed the omega drivers, I haven't had a chance to do a benchmark, but once I get back to AC power I will give it a shot.

Edit: It runs cooler to boot too! 5 hours battery left at 90%! I hope that that it automatically switches to a more aggressive power profile automatically, I have already configured the thing enough today and I am going to get bleeding fingers if I do that too much

3DMark Score 1588 3DMarks
SM2.0 Score 560
HDR/SM3.0 Score 574
CPU Score 1989


Not too bad
Your talking about 3dmark06? right?

How about 3dmark05 scores?