T61 screen resolution and wireless issues

T60/T61 series specific matters only
Post Reply
Message
Author
harpoon45
Posts: 1
Joined: Sat Oct 27, 2007 3:58 am
Location: Pittsburgh, PA USA

T61 screen resolution and wireless issues

#1 Post by harpoon45 » Sat Oct 27, 2007 1:58 pm

I just got a new T61 with the discrete graphics nVidia card, with the WSXGA+ 15.4" screen.
The issues that I'm having are:

1. The screen doesn't seem very bright at all. I have Dell laptop and the white on it appears quite sharp. (I have messed around w/ brightness; but it didn't help.)
2. If I change the screen resolution from 1680x1050 to anything lower, the fonts look fuzzy and everything seems streatched horizontally.
3. After the screen resolution change; I lose my desktop background.

I've experienced all the above problems with and witout nVidia Desktop manager.

Also, even though I have 2GB of memory on a 2GHz, and running XP things seem quite a bit slow startup, desktop background change etc.

Adding to this; I got the Intel/Pro wireless card. Everytime I restart the machine I have to manually connect to my AP to get the internet up and running.
Basically, the connection starts off with "Limited or No Connectivity". I have to disconnect and then reconnet to get it up and running.

It just won't connect automatically.

Has anyone seen issues like these?

dr_st
Senior ThinkPadder
Senior ThinkPadder
Posts: 6657
Joined: Sat Oct 29, 2005 6:20 am

Re: T61 screen resolution and wireless issues

#2 Post by dr_st » Sat Oct 27, 2007 3:54 pm

harpoon45 wrote:2. If I change the screen resolution from 1680x1050 to anything lower, the fonts look fuzzy and everything seems streatched horizontally.
Well, this is a problem with all LCD screens, because whenever you run them not at their native (highest) resolution, they interpolate the pixels, causing things (esp. text to be quite fuzzy). And of course, if you change to a res that doesn't match the 8:5 aspect ratio of 1680x1050, everything also stretches.

rayZR
Posts: 38
Joined: Wed Oct 03, 2007 12:58 am
Location: Cambridge, Mass.

#3 Post by rayZR » Sun Oct 28, 2007 3:18 pm

Also, even though I have 2GB of memory on a 2GHz, and running XP things seem quite a bit slow startup, desktop background change etc.

Adding to this; I got the Intel/Pro wireless card. Everytime I restart the machine I have to manually connect to my AP to get the internet up and running.
Basically, the connection starts off with "Limited or No Connectivity". I have to disconnect and then reconnet to get it up and running.

It just won't connect automatically.
Two of my friends have been having these same problems... since my laptop hasnt arrived yet.. It would be nice to know what the cause for this is .. and how to avoid it.

we have a few hypothesis..
1. Turbo memory
2. disabling "Deep Smart Power Down" option on the Intel Pro/1000 PL Network Connection
3. Lenovo bloatware...

If you find reasons and solutions... I am really interested as well.:)

Crunch
Senior Member
Senior Member
Posts: 713
Joined: Sun Oct 07, 2007 7:41 pm
Location: Southern California

#4 Post by Crunch » Tue Oct 30, 2007 3:02 pm

There is an excellent application that will display any non-native resolution just as clearly. It's called LiquidView. However, it is a general rule that any computer (desktop, laptop, whatever) without third-party apps like LiquidView, will run best in their native resolution, meaning the highest setting, and will look like crap the lower you set the resolution.

Altadena_Mark
Posts: 41
Joined: Fri Jul 13, 2007 12:12 pm
Location: Altadena, CA

#5 Post by Altadena_Mark » Tue Oct 30, 2007 3:26 pm

I have a X61s, XP Pro and am using the Intel ABN wireless card. I had problems coming out of sleep mode with connecting to the AP. I had to connect manually. No problems on boot-up. I un-installed Lenovo's AC and let Windows manage the connections, and I no longer have problems connecting to the AP.

dr_st
Senior ThinkPadder
Senior ThinkPadder
Posts: 6657
Joined: Sat Oct 29, 2005 6:20 am

#6 Post by dr_st » Wed Oct 31, 2007 4:08 am

Crunch wrote:There is an excellent application that will display any non-native resolution just as clearly. It's called LiquidView. However, it is a general rule that any computer (desktop, laptop, whatever) without third-party apps like LiquidView, will run best in their native resolution, meaning the highest setting, and will look like crap the lower you set the resolution.
You're mixing two things here. No application can make non-native resolutions look sharp on LCD monitors, because the cause for the blurriness is interpolation in the hardware.

What LiquidView attempts to do is to allow comfortable viewing for those who find the default font size too small at the native resolution. I haven't tested it so I cannot know whether it really does something more useful than the built-in Windows tool to increase DPI/font-sizes. My bet is that it is just a convenient manager for font size settings of the desktop, some common applications and web browsers.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: ChrisJ9876 and 13 guests