T61: Boot with external monitor

T60/T61 series specific matters only
Post Reply
Message
Author
Zeitgeist
Senior Member
Senior Member
Posts: 500
Joined: Sat May 08, 2004 2:11 am
Location: EU

T61: Boot with external monitor

#1 Post by Zeitgeist » Fri Nov 30, 2007 2:35 am

A T61 in a docking station is connected via DVI to an external monitor. When switching on the notebook only the thinkpad monitor is activated not the external, only later under windows (vista) I can switch manually to the external monitor.

I would appreciate sugestions!
Last edited by Zeitgeist on Fri Nov 30, 2007 7:27 am, edited 1 time in total.
Regards, Zeitgeist

andyP
**SENIOR** Member
**SENIOR** Member
Posts: 821
Joined: Tue Dec 27, 2005 10:56 am
Location: Ratingen, Germany
Contact:

#2 Post by andyP » Fri Nov 30, 2007 4:06 am

If you go into bios you can change the boot diplay. (Config / Display). I believe it's set to VGA as standard.
T61p 6460-67G; 15,4 WSXGA+ W7P x64, no hairdryer.
T43p 2668-G2G, 14,1 SXGA+, XP Pro, internal hairdryer
T23 2647-9LG, 14,1 SXGA+, XP Pro, no hairdryer

Zeitgeist
Senior Member
Senior Member
Posts: 500
Joined: Sat May 08, 2004 2:11 am
Location: EU

#3 Post by Zeitgeist » Fri Nov 30, 2007 7:26 am

Thanks, I tried that- no success.
Regards, Zeitgeist

Zeitgeist
Senior Member
Senior Member
Posts: 500
Joined: Sat May 08, 2004 2:11 am
Location: EU

#4 Post by Zeitgeist » Tue Dec 04, 2007 9:42 am

any further ideas?
Regards, Zeitgeist

RonS
Moderator Emeritus
Moderator Emeritus
Posts: 1374
Joined: Thu Dec 09, 2004 4:48 pm
Location: Portland, Oregon

#5 Post by RonS » Tue Dec 04, 2007 12:50 pm

andyP's suggestion is the only way I know to get the boot screen to show up on an external display. Sometimes the external display doesn't like to sync up to the 640x480 boot resolution.

Try this: When you see the first boot text show up on your internal display (and with your external monitor hooked up), try turning your external display off and on.
Apathy is on the rise, but nobody seems to care.

andyP
**SENIOR** Member
**SENIOR** Member
Posts: 821
Joined: Tue Dec 27, 2005 10:56 am
Location: Ratingen, Germany
Contact:

#6 Post by andyP » Tue Dec 04, 2007 2:52 pm

@Zeitgeist
If I get the chance, in the next day or so, I'll play around a bit. (gotta get the MwSt. for the tax man done :( )
T61p 6460-67G; 15,4 WSXGA+ W7P x64, no hairdryer.
T43p 2668-G2G, 14,1 SXGA+, XP Pro, internal hairdryer
T23 2647-9LG, 14,1 SXGA+, XP Pro, no hairdryer

andyP
**SENIOR** Member
**SENIOR** Member
Posts: 821
Joined: Tue Dec 27, 2005 10:56 am
Location: Ratingen, Germany
Contact:

#7 Post by andyP » Mon Dec 10, 2007 5:21 am

As promised, I had a play around. The set-up;
T61 8889-2BG (s. sig). BIOS vers. 1.21 ECC 1.06 attached to Mini-Dock with 17" TFT connected via DVI. (External display was always on)

Trial 1. With standard bios settings; Default Primary Video – “Intern”, Boot Display Device “Analog VGA”
The external screen displayed everything from boot splash through to desktop, the internal screen displayed only when desktop was reached.

Trial 2. With changed bios settings; Default Primary Video – “Internal”, Boot Display Device “Digital (DVI”.
Results were exactly the same as above.

@Zeitgeist I can only suggest that you maybe load bios defaults and give it another go.
T61p 6460-67G; 15,4 WSXGA+ W7P x64, no hairdryer.
T43p 2668-G2G, 14,1 SXGA+, XP Pro, internal hairdryer
T23 2647-9LG, 14,1 SXGA+, XP Pro, no hairdryer

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 9 guests