Bezel bulge: defect or not?

T60/T61 series specific matters only
Post Reply
Message
Author
wmouhot
Posts: 2
Joined: Sat Apr 05, 2008 12:21 am
Location: Tampa, FL

Bezel bulge: defect or not?

#1 Post by wmouhot » Sat Apr 05, 2008 9:03 pm

Hello everyone. I received my T61p about a week ago and I just happened to notice that there is a VERY subtle bulge/bump on the bezel between the power button and the thinkvantage button. It appears that it is due to the LCD cable running right underneath it. I researched this topic online and it appears to be a very common characteristic of these machines. What I would like to know is if this is a defect or is this 'bump' within spec? Do all T61/T61p/other T's have this same bump? Additionally, if this is a defect, do you think it is worth the trouble of getting it fixed in an otherwise flawless (so far) machine? Not to mention the fact that it is hardly noticeable and I might get my laptop back with more problems than I sent it away with. I thank you all very much for your input.

Will

mgo
thinkpads.com customer
thinkpads.com customer
Posts: 877
Joined: Wed Jun 13, 2007 10:59 pm
Location: Tucson, Az

Re: Bezel bulge: defect or not?

#2 Post by mgo » Sat Apr 05, 2008 11:47 pm

wmouhot wrote:Hello everyone. I received my T61p about a week ago and I just happened to notice that there is a VERY subtle bulge/bump on the bezel between the power button and the thinkvantage button.

Will
The slight "bow" is by design. An arch is stronger than a straight support. (as in bridges)

wmouhot
Posts: 2
Joined: Sat Apr 05, 2008 12:21 am
Location: Tampa, FL

#3 Post by wmouhot » Sun Apr 06, 2008 12:51 am

Thank you for your response. I have to ask, what is the purpose of the arch support in this particular place on the laptop? Does it just serve to protect the LCD cable?

mgo
thinkpads.com customer
thinkpads.com customer
Posts: 877
Joined: Wed Jun 13, 2007 10:59 pm
Location: Tucson, Az

#4 Post by mgo » Sun Apr 06, 2008 1:32 am

wmouhot wrote:Thank you for your response. I have to ask, what is the purpose of the arch support in this particular place on the laptop? Does it just serve to protect the LCD cable?
I believe it is to protect the entire screen structure, providing some "give" when other objects are placed on it...like books or suitcases...

As I recall there is an extensive article on this on Lenovoblogs.com under the "design matters" section, I think. It's been a while since I read it, so my memory of where it is may be flawed.

Paul Unger
Senior Member
Senior Member
Posts: 551
Joined: Mon Jun 14, 2004 8:18 am
Location: Solomon Islands / Canada

#5 Post by Paul Unger » Sun Apr 06, 2008 8:59 am

Yours is not the only machine to have "the bulge". See here, here, and here (especially second picture in fourth post). Mine has it too . . . It's quite ugly, but I try not to look there. :roll:

@ mgo: I don't think OP is referring to the back of the lcd cover (i.e., top of the computer when the lid is closed) but the area between the power and 'blue' + volume buttons.
T430s 2352-CTO 2.60GHz (i5), 4.0GB, 500GB (7200rpm), 14" HD+, W7 (64)
X201 3249-CTO 2.53GHz (i5), 8.0GB, 500GB (7200rpm), 12" WXGA, W7 (64)
T42 2373-3UU 1.7GHz (PM), 2.0GB, 80GB, 14" SXGA+, XP SP3 / Ubuntu 9.04
T42 2373-4TU 1.7GHz (PM), 1.5GB, 60GB, 14" XGA, XP SP3

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: Thinkpad4by3 and 7 guests