T60P Temps

[gmgfarrand]

Ok,

I took the Heatsink/Fan out and removed the thermal pads.

I AC Epoxied the heatpipe from the GPU onto the copper for the CPU, as shown in another post here.

I took 2 copper pennies and filed & lapped them, then AC epoxied to where the GPU and Northbridge (?) are.

Applied AC paste and installed, ambient temps for CPU is about 45-49C, and the GPU usually is about 70C.

I run OCCTPT or Real-Time HDR test for about 10 min.

With OCCTPT, my cpu temp gets to 86C with 99.53% CPU Utilization.

With HDR, My CPU gets to 76C and GPU is at 85C.

Are these "good" temps?

[aaa]

They're "normal" temps. The "normal" GPU idle temp has always bothered me though (on the T4x the temp was in the 40s).

Your load temps are fine. You can get lower-than-usual CPU load temp by using undervolting software like NHC or RMClock.

[gmgfarrand]

Cool...
It seems that my temps are a bit lower in Vista than in XP as well..

I idle at about 41c in Vista and 53c in XP

Well, there's 1 thing Vista is good for...