T61 will not hibernate
T61 will not hibernate
I've got a brand new T61 running XP Pro SP3.
Everything appears to be working just as it should...except I can't get hibernation to work. Whether by closing the lid (with power manager set to hibernate in this instance) or by using Fn F4, the machine states "Preparing to Hibernate" and then stalls. I've let it run for 30 minutes and it still doesn't move. It won't go into standby as well.
I've re-created the hibernation file, re-installed the power management driver, tried four Microsoft hotfixes for hibernation issues, but nothing seems to work.
Any suggestions on what else to check or do at this point?
Everything appears to be working just as it should...except I can't get hibernation to work. Whether by closing the lid (with power manager set to hibernate in this instance) or by using Fn F4, the machine states "Preparing to Hibernate" and then stalls. I've let it run for 30 minutes and it still doesn't move. It won't go into standby as well.
I've re-created the hibernation file, re-installed the power management driver, tried four Microsoft hotfixes for hibernation issues, but nothing seems to work.
Any suggestions on what else to check or do at this point?
Take a look at the following:
http://support.microsoft.com/kb/952117
Its not a freely distributed hotfix so you will have to "request" the hotfix download by supplying an email address - the download itself is free though. (And then MS PR engine wonders why people hate them so much.)
http://support.microsoft.com/kb/952117
Its not a freely distributed hotfix so you will have to "request" the hotfix download by supplying an email address - the download itself is free though. (And then MS PR engine wonders why people hate them so much.)
“Long you live and high you'll fly and smiles you'll give and tears you'll cry and all you touch and all you see is all your life will ever be.”
I'll tell you why. I tried three of these hotfixes by "request" (confusing enough since the fix, the kb article number, and the file number are not the same. So three fixes equal nine numbers to match up to figure out which is which. Great system!)syedj wrote:Take a look at the following:
http://support.microsoft.com/kb/952117
Its not a freely distributed hotfix so you will have to "request" the hotfix download by supplying an email address - the download itself is free though. (And then MS PR engine wonders why people hate them so much.)
Fix191750 (KB Article Number(s): 928097) - Would NOT install, because already installed with SP
Fix231674 (KB Article Number(s): 952117) - Did NOT work
Fix 75788 (KB Article Number(s): 834202) - Did NOT work
Anyone know what else to check? Would process explorer or something else be able to reveal what is causing hibernation to hang, since there is no indication in event viewer nor in device manager. So nothing (or everthing) looks suspect.
-
crashnburn
- ThinkPadder

- Posts: 1643
- Joined: Sat Apr 22, 2006 4:26 pm
- Location: TX, USA & Bombay, India
I am wondering if this will solve my hibernation issue?
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP (Old)
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Camera LED does not work? Make sure it's not taped over. :)
by dr_st » Sat Feb 18, 2017 12:00 pm » in ThinkPad X200/201/220 and X300/301 Series - 0 Replies
- 805 Views
-
Last post by dr_st
Sat Feb 18, 2017 12:00 pm
-
-
-
Why does the T60 have a centered LCD but the T61 and T500 not?
by Thinkpad4by3 » Fri Jun 30, 2017 9:59 pm » in ThinkPad T6x Series - 2 Replies
- 47 Views
-
Last post by dr_st
Sat Jul 01, 2017 7:52 am
-
-
-
Ultranav not working. Help.
by Blender » Wed Jan 04, 2017 7:35 pm » in ThinkPad R, A, G and Z Series - 14 Replies
- 1843 Views
-
Last post by dr_st
Tue Jan 17, 2017 3:15 am
-
-
- 2 Replies
- 942 Views
-
Last post by Blender
Sat Jan 07, 2017 1:25 am
Who is online
Users browsing this forum: No registered users and 12 guests





