Adding Bluetooth to T61p--Where the eff is the Screw?

Message

UpIn5mOk3 · #1 Post by **UpIn5mOk3** » Tue Oct 07, 2008 10:20 pm

Hey guys,
Long time lurker and thinkpad fan here. I just received a bluetooth module for my t61p in the mail. I have no problem installing it (or atleast I shouldn't) but does the screw that holds the module in place come with the laptop already? It doesn't come with the bt adapter....and I was scanning some other forums and came across a FRU for just the screw. Hopefully I won't have to order it from lenovo...

TIA

Brad · #2 Post by **Brad** » Wed Oct 08, 2008 1:51 am

If you have no other screws use one that fits from elsewere on your ThinkPad on the outside that you can then replace later since the module is inside the LCD bezel. I would be more concerned that if you have not checked already that your LCD cable has no connection for it.

Brad

#3 Post by **erik** » Wed Oct 08, 2008 1:58 am

Brad wrote:I would be more concerned that if you have not checked already that your LCD cable has no connection for it.

unlike older models, the T61/T61p has the BT socket on the cable whether BT is configured or not.

reference:
http://www-307.ibm.com/pc/support/site. ... 68222.html
http://www-307.ibm.com/pc/support/site. ... 68233.html

Brad · #4 Post by **Brad** » Wed Oct 08, 2008 2:04 am

Thanks for the info.

I was surprised by no connector on a T60 before.

Are the Bluetooth modules the same?

Brad

#5 Post by **erik** » Wed Oct 08, 2008 3:09 am

the 39T0497 BT module is used in every _60/_61 series and the X300.

Brad · #6 Post by **Brad** » Wed Oct 08, 2008 5:46 am

Thanks again.

Radioguy · #7 Post by **Radioguy** » Wed Oct 08, 2008 6:09 am

Would you consider doing an illustrated step by step when you actually do the install? (pictures at each step) It would be greatly appreciated.

UpIn5mOk3 · #8 Post by **UpIn5mOk3** » Thu Oct 09, 2008 12:55 am

Brad wrote:If you have no other screws use one that fits from elsewere on your ThinkPad on the outside that you can then replace later since the module is inside the LCD bezel. I would be more concerned that if you have not checked already that your LCD cable has no connection for it.

Brad

That was my original idea, but I'm a perfectionist and really anal when it comes to my computers, and knowing one screw is missing would drive me nuts.

UpIn5mOk3 · #9 Post by **UpIn5mOk3** » Thu Oct 09, 2008 12:58 am

Radioguy wrote:Would you consider doing an illustrated step by step when you actually do the install? (pictures at each step) It would be greatly appreciated.

Actually, yea. I never really thought about that. Thanks for the idea, it'll make this install a little more fun. Now for that [censored] screw...do you guys think Lenovo reps would have a clue? I guess its worth a shot to call them up tomorrow.

Brad · #10 Post by **Brad** » Thu Oct 09, 2008 1:08 am

UpIn5mOk3 wrote:knowing one screw is missing would drive me nuts.

Since the screw is under the bezel temporarily remove a like screw from the outside so you can complete the upgrade. Then you can replace the outside screw at a later date. This way you can be using your Bluetooth immediately.

I can send you one screw.

Brad

peralex1 · #11 Post by **peralex1** » Mon Oct 20, 2008 8:09 pm

Take a screw holding keyboard bezel down to the fan assembly. It has 2 screws. They are exactly the same as the one holding BT module in place. Are you taking the hole screen assembly off? You can do it without that step. Slightly painfull but save a ton of time. Suggest to check Lenovo training video web site on how to take screen assembly apart especially if you never done T61 screen - it is very different than all previous models including T60. Here is a link http://www.lenovoservicetraining.com/ion/
Just my 2 cents.

Adding Bluetooth to T61p--Where the eff is the Screw?

Adding Bluetooth to T61p--Where the eff is the Screw?

Screw

Who is online