T60 Rubber Feet

T60/T61 series specific matters only
Post Reply
Message
Author
mdclow
Freshman Member
Posts: 85
Joined: Thu May 24, 2007 2:33 pm
Location: West Bloomfield, Michigan
Contact:
Contact mdclow

T60 Rubber Feet

#1 Post by mdclow » Mon Apr 25, 2011 8:00 am

There are (4) rubber feet pads on the bottom of my T60. There are (2) sqaure ones on the back where the battery is located and then (2) long thin ones on the front underside of the palm rest. One of the long thins ones is continuing to come off. Should I re-glue with some kind of glue or are OEM replacements available.

Your advise is appreciated . . .
Michael Clow


ThinkPad T530 2359-CTO: i7-3520M (up to 3.60 GHz) 16GB RAM, 250GB Samsung 840 SSD, 15.6" 1600 x 900 LED, NVIDIA NVS 5400M Graphics with Optimus Technology

ThinkPad T60: 8744-5BU T7200(2GHz), 4GB RAM, 256GB Crucial C-300 SSD HD, 15.4in 1680x1050 LCD
Top
Harryc
Moderator Emeritus
Moderator Emeritus
Posts: 13228
Joined: Thu Apr 12, 2007 8:23 am
Location: Upstate New York

Re: T60 Rubber Feet

#2 Post by Harryc » Mon Apr 25, 2011 8:31 am

I would glue it back. I have used superglue and rubber cement for this job in the past.
http://www.staples.com/Elmers-Rubber-Ce ... uct_473595
Top
mdclow
Freshman Member
Posts: 85
Joined: Thu May 24, 2007 2:33 pm
Location: West Bloomfield, Michigan
Contact:
Contact mdclow

Re: T60 Rubber Feet

#3 Post by mdclow » Mon May 30, 2011 5:52 pm

I used rubber cement and it work great, thanks.
Michael Clow


ThinkPad T530 2359-CTO: i7-3520M (up to 3.60 GHz) 16GB RAM, 250GB Samsung 840 SSD, 15.6" 1600 x 900 LED, NVIDIA NVS 5400M Graphics with Optimus Technology

ThinkPad T60: 8744-5BU T7200(2GHz), 4GB RAM, 256GB Crucial C-300 SSD HD, 15.4in 1680x1050 LCD
Top
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “ThinkPad T6x Series”

Who is online

Users browsing this forum: No registered users and 3 guests