help me intel 2200 b/g don't work on x40 2372-JAA

Message

incvn03 · #1 Post by **incvn03** » Thu Jan 19, 2006 9:55 pm

wifi card have FRU is 39T0079 used on T42 very good but I plug in IBM x40 2372-JAA (upgrade, this X40 not have wifi), driver not work, ( I downloaded lastest driver for this wifi card from IBM site , update bios newest )

Help me !
thanks

LtTPfan · #2 Post by **LtTPfan** » Thu Jan 19, 2006 11:09 pm

That card is compatible with your machine and your machine is "wireless upgradeable" so it should work. Did you connect the antennas properly, white to "main", black to "aux?" Be sure to read the installation instructions for the driver, I think you have to uninstall the previous driver 1st. Did you update the Embedded Controller Program when you updated the BIOS? The two go hand-in-hand. You may have to reinstall Access Connections. Be sure to read the installations instructions for that also.

incvn03 · #3 Post by **incvn03** » Fri Jan 20, 2006 12:13 am

thank for quick reply, i updated bios 2.03 , Embedded Controller Program is 1.6 , white to "main", black to "aux on card, reinstall windows xp and install driver intel b/g for IBM x40 version 9.x
but device manager showed

device status : This device cannot start. (Code 10)

location : PCI Slot 1 (PCI bus 2, device 2, function 0)

why, i don't understand, i wrong ?

help me ! thanks

incvn03 · #4 Post by **incvn03** » Fri Jan 20, 2006 3:02 am

help me !

incvn03 · #5 Post by **incvn03** » Fri Jan 20, 2006 11:07 am

anybody know ?

incvn03 · #6 Post by **incvn03** » Sun Jan 22, 2006 6:13 am

who can help me ?

cj3209 · #7 Post by **cj3209** » Mon Jan 23, 2006 1:26 pm

My 2200 FRU is 93P3483. Is your card an actual 2200 wireless card?

Try reseating the card. Better yet, try another wireless card. Perhaps your X40 has a defective wireless card slot?

Good luck.

incvn03 · #8 Post by **incvn03** » Wed Jan 25, 2006 12:40 am

i try to again but i can't install driver correct. I try plug wifi intel b 2100B from IBM t41 to x40 2372-jaa but not work , i installed driver download from IBm site.
help me ( divice not start (code 10)

amgdoc · #9 Post by **amgdoc** » Wed Jan 25, 2006 10:08 am

incvn03 wrote:i try to again but i can't install driver correct. I try plug wifi intel b 2100B from IBM t41 to x40 2372-jaa but not work , i installed driver download from IBm site.
help me ( divice not start (code 10)

CODE 10

If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:
This device is either not present, not working properly, or does not have
all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.

Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.

although you got the drivers from ibm website, the wcard isn't loading up right. i have no idea what. put the card back into the T and see if it still works, you might have damaged it during the exchange. if it is not the case, then try a different wireless pci card that you know would work in a x40 to test and see if the wcard slot is messed up.

incvn03 · #10 Post by **incvn03** » Sun Jan 29, 2006 10:23 am

thanks , but it's not work, i think FRU another ?

incvn03 · #11 Post by **incvn03** » Wed Feb 01, 2006 2:20 am

why ?

cj3209 · #12 Post by **cj3209** » Wed Feb 01, 2006 12:02 pm

Hope your X40 is under warranty - sounds like a hardware issue.

Good luck!

incvn03 · #13 Post by **incvn03** » Sat Feb 18, 2006 4:15 am

it's doesn't work, i don't know

koden · #14 Post by **koden** » Mon Feb 02, 2009 8:35 am

I have same problem T41 2374-QG6 gives 1802 error when I have installed intel 2200 wifi card 39T0079...
The funny thing is that i have installed a lot of the same cards in T40,41 and 42...no problems before this T41...
2 dif. 39T0079 have been tryed...same errror

help me intel 2200 b/g don't work on x40 2372-JAA

help me intel 2200 b/g don't work on x40 2372-JAA

Re: help me intel 2200 b/g don't work on x40 2372-JAA

Who is online