Clicking gone...
Clicking gone...
Just curious, has anybody else noticed that after the latest fw-update for the hard drive the clicking seems to be gone for good?
Q
Q
Nothing but quality
More info
Sorry guys, I thought first that my reply was going to the sticky-thread for X41 "clicking" subject...
I'm talking about X41 with 60G disk. And the fw-update I meant was:
Version: FWHD43
Release Date: 2006/06/19
Indeed, I did another flash for my wifes X41 and the clicking disappeared. However, I couldn't find any info from IBM site that what this fw-update is meant to upgrade/change?!
Q
Edit: Direct link for the update:
http://www-307.ibm.com/pc/support/site. ... MIGR-62282
I'm talking about X41 with 60G disk. And the fw-update I meant was:
Version: FWHD43
Release Date: 2006/06/19
Indeed, I did another flash for my wifes X41 and the clicking disappeared. However, I couldn't find any info from IBM site that what this fw-update is meant to upgrade/change?!
Q
Edit: Direct link for the update:
http://www-307.ibm.com/pc/support/site. ... MIGR-62282
Nothing but quality
I did that couple day ago too. But that does not help either.
HOWEVER, after I dumped ZoneAlarm firewall and converted to Kerio firewall, the clicking is almost gone. I rarely hear the clicks though sometime, I still can hear a weak clicking every couple seconds.
HOWEVER, after I dumped ZoneAlarm firewall and converted to Kerio firewall, the clicking is almost gone. I rarely hear the clicks though sometime, I still can hear a weak clicking every couple seconds.
currently own X61S, T42, X31, Macbook Pro Unibody i5
weird
I'm using ZoneAlarm free version without any clicking.... 
Q

Q
bigtiger wrote:I did that couple day ago too. But that does not help either.
HOWEVER, after I dumped ZoneAlarm firewall and converted to Kerio firewall, the clicking is almost gone. I rarely hear the clicks though sometime, I still can hear a weak clicking every couple seconds.
Nothing but quality
I have to live with the curiousity about if this firmware would help me since I don't know anybody with a ultradock and USB CD-drives aren't supported.
But it seems this firmware aren't intended to remove the clicking.
By the way... I have the clicking no matter if I am in Windows or using a DOS utility and I have had my HDD switched at warranty and they sounded exactly the same.
But it seems this firmware aren't intended to remove the clicking.
By the way... I have the clicking no matter if I am in Windows or using a DOS utility and I have had my HDD switched at warranty and they sounded exactly the same.
IBM X41 2527-67G
12.1", 1.5 GHz, 1024 MB DDR2, 40 GB 4200 RPM 1.8" HDD, 1.3 kg w. 4-cell battery, 1.5 kg w. 8-cell battery
12.1", 1.5 GHz, 1024 MB DDR2, 40 GB 4200 RPM 1.8" HDD, 1.3 kg w. 4-cell battery, 1.5 kg w. 8-cell battery
TO upgrade a X41T machine or a machine without built-in CD drive, please check what I did.
I pulled off the HD, and installed the HD to my T43....and off it upgraded.
How?
I screwed off the caddy of T43, put it on the HD from the x41. But you have to put it on smartly so that the caddy will stick out as the HD from X41 is too short.
I do find that the HD is quieter but it still clicks somehow. But it is not that bad. I can barely hear actually unless I really pay attention to it.
I pulled off the HD, and installed the HD to my T43....and off it upgraded.
How?
I screwed off the caddy of T43, put it on the HD from the x41. But you have to put it on smartly so that the caddy will stick out as the HD from X41 is too short.
I do find that the HD is quieter but it still clicks somehow. But it is not that bad. I can barely hear actually unless I really pay attention to it.
currently own X61S, T42, X31, Macbook Pro Unibody i5
thx for the tip bigtiger but I don't dare mess with my mom's T42. It is still under warranty and since it doesn't seem like the firmware update really helps a lot I don't care to make such a mess about it.
IBM X41 2527-67G
12.1", 1.5 GHz, 1024 MB DDR2, 40 GB 4200 RPM 1.8" HDD, 1.3 kg w. 4-cell battery, 1.5 kg w. 8-cell battery
12.1", 1.5 GHz, 1024 MB DDR2, 40 GB 4200 RPM 1.8" HDD, 1.3 kg w. 4-cell battery, 1.5 kg w. 8-cell battery
clicking
Just curious, what type of clicking are we talking about?? I'm not a specialist with computers but I assume that a hard drive always keep some kind of "noice" and even that it is quite absurd to expect a 100% silent drive?? What type of noice I was talking about was "bang" like clicks that my hd did from time to time. These bangs were so loud that I could here them more than ten feet away. This could be described as annoying because everybody around me could here them too. If there was someone giving me "the look" I used to say that; well, the engine of a Rolls Royce is not the quietest either and in case you don't know this is THE Rolls Royce of laptops.
If the hd is rotating and there are several moving parts I assume that a drive can not be total silent? Or am I missing the point here?
I could describe these two X41's as whisper quiet now.
Q
If the hd is rotating and there are several moving parts I assume that a drive can not be total silent? Or am I missing the point here?
I could describe these two X41's as whisper quiet now.
Q
Nothing but quality
-
- Similar Topics
- Replies
- Views
- Last post
-
-
W520 B156HW01 screen upgrade gone wrong
by lordsnipe » Fri Jan 06, 2017 5:44 am » in ThinkPad W500/510/520 and W7x0 Series - 16 Replies
- 2151 Views
-
Last post by lordsnipe
Mon Jan 09, 2017 6:38 pm
-
-
-
GONE: ThinkPad X300 (TYPE 6478-1VU) +shipping
by cds.helpdesk » Tue Jan 17, 2017 11:31 pm » in Marketplace - Forum Members only - 3 Replies
- 712 Views
-
Last post by cds.helpdesk
Mon Jan 30, 2017 2:41 pm
-
-
- 12 Replies
- 621 Views
-
Last post by Khipata
Mon Apr 17, 2017 8:35 am
Who is online
Users browsing this forum: No registered users and 3 guests





