X21 USB Question~

[wilsonhs]

Hi everyone.
I wanna ask that does a X20/21 support USB2.0 at the port on board?
If yes, is there any upgrade driver for WINXP?
thanks

[The Spirit of X21]

The X21 does not have USB 2.0. You can however use a USB 2.0 PCMCIA card. If I am not mistaken, the X31 was the first X series to have 2.0.

[wilsonhs]

o...wad a pitty... but anyway thanks ur info.

and btw, XPalways pop up a bubble when i insert a usb2.0 pen drive to X21 to tell me try to find a usb2.0 port ...

how can i disable it?thks

[The Spirit of X21]

Taken from http://www.oreillynet.com/cs/user/view/cs_msg/62771

"In Device Manager, click on the USB host controller, click the Advanced tab and then check the box on the bottom of the window that says “Don’t tell me about USB errors.” I think you need to do this for each USB controller listed under USB in Device Manager so that the error message will not appear no matter which controller the device gets plugged into.”

This solution worked for me. Hope this helps.

[wilsonhs]

o great, its working, thanks you alot