Thinkpads Forum

Hello,

Is it possible to find any x60/x60s/x60 tablet or similar x61 with 1400x1050 LCD?

which TYPEs I ought to I looking for?

If you have already posted the answer, please write about your faults known of these models. I want to change my T40p on any of the above mentioned, but at the same resolution (more than 1024x, 768, I would like to have 1400x1050).

Both X60 and X61 tablets were available with SXGA+ (1400x1050) AFFS panels.

Additionally, you can mod a standard X60/61 to accept such a panel, but it's a fairly expensive project.

I own a couple of X61 tablets with SXGA+ screens...PM me if you're serious about obtaining one...

Thank you for your reply.

I'm looking for any good solution instead of my t40p.

How does work the digitizer? Is it any way to use a fingers?

What is best solution in X60s which is not overheting, BGA is unsolderable, all is good and stable?
Must be any type - the best of the x60s's

regards

Not only is putting a SXGA+ LCD into a X60s expensive, it requires a fairly high level of skill. If you're interested in a X60 tablet with the SXGA+ LCD, it does not do touch. All X series CPUs are soldered and cannot be upgrade without replacing the motherboard. If you're looking for a smaller ThinkPad with a high resolution screen, the X200s with the 1440x900 LCD might be worth a look.

thank you for your reply.

I'm looking for any cheap and stable solution. X200 is much expensive.

In my t40p I have problems with usb because one of the chips inside are broken.
I would like to avoid similar problems. Problems with BGA, etc

hello,
thank you for your replies

Please tell me two things - how expensive will be LCD swap in this machine http://www.dazzit.com/item/en/US/Notebo ... o-17023LU/# ? TYPE 1702-3LU. I would like to get display with resolution as high as possible.
I am asking this way because I have possibility to buy computer with this type.

Please tell me what is the chance of coming across a loosening in BGA or other components in x60's.
What can mean a vertical line on the screen?
Could this be damage other than the LCD?

thank you for your help,

best regards

You may wish to take a look at this.

thank you

Please tell me what is the chance of coming across a loosening in BGA or other components in x60's.

What can mean a vertical line on the screen?

Could this be damage other than the LCD?

thank you for your help,

best regards

X6x is basically risk-free in that area. The lines you see are most likely from a failed LCD panel.

thank you for your reply
risk free with unsoldering bga? Or any other components?
Im looking for good and stable machine

Yes, regarding unsoldering. And they are very rigid and strong machines with excellent performance.