If the LCD sxga to x60 tablet will be compatible with the x6

Message

rychuu · #1 Post by **rychuu** » Mon Jan 28, 2013 5:38 am

If the LCD sxga to x60 tablet will be compatible with the x61s non tablet?

I would like to replace my xga LCD to sxga from X60T

Raceboy · #2 Post by **Raceboy** » Mon Jan 28, 2013 6:14 am

Not directly, neither physically nor electrically. You need to flash special BIOS that enables using SXGA+ resolutions on internal LCD, then you have to modify the LCD cable as the pinouts are different and finally you have to prepare the panel itself: cut the tabs for mounting (as used in Tablet), remove digitizer, trim the LCD frame (top is thicker and X61 LCD bezel won't fit otherwise) and use double-sided tape to secure the panel to hinges (there are no screw holes).

rychuu · #3 Post by **rychuu** » Mon Jan 28, 2013 6:19 am

Raceboy wrote:Not directly, neither physically nor electrically. You need to flash special BIOS that enables using SXGA+ resolutions on internal LCD, then you have to modify the LCD cable as the pinouts are different and finally you have to prepare the panel itself: cut the tabs for mounting (as used in Tablet), remove digitizer, trim the LCD frame (top is thicker and X61 LCD bezel won't fit otherwise) and use double-sided tape to secure the panel to hinges (there are no screw holes).

Thank you for your fast reply,

I would like to buy cable on ebay: http://www.ebay.com/itm/ThinkPad-X61-X6 ... 0771814345

Is it good? I think that it should be proper to not customizing the pinouts?

rychuu · #4 Post by **rychuu** » Mon Jan 28, 2013 9:32 am

Is that voltages are the same?

If the LCD sxga to x60 tablet will be compatible with the x6

If the LCD sxga to x60 tablet will be compatible with the x6

Re: If the LCD sxga to x60 tablet will be compatible with the x6

Re: If the LCD sxga to x60 tablet will be compatible with the x6

Re: If the LCD sxga to x60 tablet will be compatible with the x6

Who is online