Page 1 of 1
If the LCD sxga to x60 tablet will be compatible with the x6
Posted: Mon Jan 28, 2013 5:38 am
by rychuu
If the LCD sxga to x60 tablet will be compatible with the x61s non tablet?
I would like to replace my xga LCD to sxga from X60T
Re: If the LCD sxga to x60 tablet will be compatible with the x6
Posted: Mon Jan 28, 2013 6:14 am
by Raceboy
Not directly, neither physically nor electrically. You need to flash special BIOS that enables using SXGA+ resolutions on internal LCD, then you have to modify the LCD cable as the pinouts are different and finally you have to prepare the panel itself: cut the tabs for mounting (as used in Tablet), remove digitizer, trim the LCD frame (top is thicker and X61 LCD bezel won't fit otherwise) and use double-sided tape to secure the panel to hinges (there are no screw holes).
Re: If the LCD sxga to x60 tablet will be compatible with the x6
Posted: Mon Jan 28, 2013 6:19 am
by rychuu
Raceboy wrote:Not directly, neither physically nor electrically. You need to flash special BIOS that enables using SXGA+ resolutions on internal LCD, then you have to modify the LCD cable as the pinouts are different and finally you have to prepare the panel itself: cut the tabs for mounting (as used in Tablet), remove digitizer, trim the LCD frame (top is thicker and X61 LCD bezel won't fit otherwise) and use double-sided tape to secure the panel to hinges (there are no screw holes).
Thank you for your fast reply,
I would like to buy cable on ebay:
http://www.ebay.com/itm/ThinkPad-X61-X6 ... 0771814345
Is it good? I think that it should be proper to not customizing the pinouts?
Re: If the LCD sxga to x60 tablet will be compatible with the x6
Posted: Mon Jan 28, 2013 9:32 am
by rychuu
Is that voltages are the same?