Swapped screen, now digitizer doesn't display position
Posted: Mon Feb 18, 2013 6:04 pm
OK, I managed the screen swap on my X61 tablet for a X60 screen. Now digitizer no longer detects position of the pen. Once I approach the pen towards screen, the cursor turns to digitizer but doesn't move unless I move the trackpoint.
During the screen swap I did a brief test so I know digitizer works. It also now doesn't work with old screen.
I'm suspecting a disconnected cable somewhere or damaged board that connects monitor cable to the motherboard - the FRU 41W1477, since I bent it a bit during reassembly
Do you have any suggestions?
Plan of action is to order 41W1477 since it costs only 10 EUR and see then.
During the screen swap I did a brief test so I know digitizer works. It also now doesn't work with old screen.
I'm suspecting a disconnected cable somewhere or damaged board that connects monitor cable to the motherboard - the FRU 41W1477, since I bent it a bit during reassembly
Do you have any suggestions?
Plan of action is to order 41W1477 since it costs only 10 EUR and see then.