X61 Screen

Message

DeanoRN · #1 Post by **DeanoRN** » Sat Jan 17, 2015 3:37 pm

Hi all,

i have a X61 lenovo with a cracked screen, so was just wondering will only a 12.1 x61 screen fit or will other models fit also and if so which ones?

will a X40 fit?

thanks for any help, i really appreciate it.

DeanoRN · #2 Post by **DeanoRN** » Sun Jan 18, 2015 5:42 pm

#3 Post by **RealBlackStuff** » Sun Jan 18, 2015 6:55 pm

Please read the Forum Rules: http://forum.thinkpads.com/viewtopic.php?f=16&t=14339
Don't bump anything before at least 3 days have passed.
Be patient!

ajkula66 · #4 Post by **ajkula66** » Sun Jan 18, 2015 11:23 pm

Welcome to the forum!

DeanoRN wrote:will a X40 fit?

No. You need a panel from X60 or X61.

Good luck.

tomatenfisch · #5 Post by **tomatenfisch** » Fri Jan 30, 2015 6:14 am

The X60/X61 uses standard panels. So there are other options, too. The only obstacle might be the EDID. However, it has been reported that nc4010 panels will work within the X60/X61 ootb.

Thomas

axur-delmeria · #6 Post by **axur-delmeria** » Fri Jan 30, 2015 12:52 pm

I don't think there's an EDID check involved. I've succeeded in replacing X60/61 displays with panels from Dell D400 and D410 laptops. It's been done before, there are much older threads that discussed replacing the LCD on an X60/61.

As for the X40/X41, the HMM lists two LCD FRUs, with corresponding LCD cable assemblies.
One of them, the Samsung LTN121XA-L01, is not compatible with the X60.

The other one, IDTech AGX02C, appears to be compatible.
I'm saying "appears to be compatible" because I checked the datasheet and the pinout is correct, but I don't have an actual AGX02C to confirm it.

X61 Screen

X61 Screen

Re: X61 Screen

Re: X61 Screen

Re: X61 Screen

Re: X61 Screen

Re: X61 Screen

Who is online