Page 1 of 1
X61 Screen
Posted: Sat Jan 17, 2015 3:37 pm
by DeanoRN
Hi all,
i have a X61 lenovo with a cracked screen, so was just wondering will only a 12.1 x61 screen fit or will other models fit also and if so which ones?
will a X40 fit?
thanks for any help, i really appreciate it.
Re: X61 Screen
Posted: Sun Jan 18, 2015 5:42 pm
by DeanoRN
Bump
Re: X61 Screen
Posted: Sun Jan 18, 2015 6:55 pm
by RealBlackStuff
Please read the Forum Rules:
http://forum.thinkpads.com/viewtopic.php?f=16&t=14339
Don't bump anything before at least 3 days have passed.
Be patient!
Re: X61 Screen
Posted: Sun Jan 18, 2015 11:23 pm
by ajkula66
Welcome to the forum!
DeanoRN wrote:will a X40 fit?
No. You need a panel from X60 or X61.
Good luck.
Re: X61 Screen
Posted: Fri Jan 30, 2015 6:14 am
by tomatenfisch
The X60/X61 uses standard panels. So there are other options, too. The only obstacle might be the EDID. However, it has been reported that nc4010 panels will work within the X60/X61 ootb.
Thomas
Re: X61 Screen
Posted: Fri Jan 30, 2015 12:52 pm
by axur-delmeria
I don't think there's an EDID check involved. I've succeeded in replacing X60/61 displays with panels from Dell D400 and D410 laptops. It's been done before, there are much older threads that discussed replacing the LCD on an X60/61.
As for the X40/X41, the HMM lists two LCD FRUs, with corresponding LCD cable assemblies.
One of them, the Samsung LTN121XA-L01, is not compatible with the X60.
The other one, IDTech AGX02C, appears to be compatible.
I'm saying "appears to be compatible" because I checked the datasheet and the pinout is correct, but I don't have an actual AGX02C to confirm it.