BSOD upon swapping HD between two same model X61
Posted: Wed Jan 20, 2016 3:22 pm
Hey guys and girls:
I have been ignoring a loud fan and working away on my X61 for almost a year now. Last week I got my first couple failures to boot because of "Fan Error" at start up. (It now starts intermittently, but the writing is on the wall I need to replace the fan.)
I have an identical model X61 back up, so I put the Hard Drive from the X61 with the fan issues along with its 8Gb Crucial Memory into the back up X61 and consistently half-way through boot I get the Blue Screen Of Death. (Questioning recent hardware changes.)
So, since the machines are both the same model, I assume that either:
1. The WIFI cards are not the same (I need to take the palm rests off and look);
2. I installed Middleton's BIOS on the one but not on the back up;
3. There is something in BIOS or in W7 Home Premium 64-bit which recognizes and requires the same Machine Code for the motherboard for it to boot properly?
4. Any other suggestions?
Finally, how can I tell if I installed Middleton's BIOS on the back up X61?
Can I reinstall it without problems if I cannot tell?
And finally, where can I find the current Middleton's BIOS for the X61?
Thanks in advance for your help.
I have been ignoring a loud fan and working away on my X61 for almost a year now. Last week I got my first couple failures to boot because of "Fan Error" at start up. (It now starts intermittently, but the writing is on the wall I need to replace the fan.)
I have an identical model X61 back up, so I put the Hard Drive from the X61 with the fan issues along with its 8Gb Crucial Memory into the back up X61 and consistently half-way through boot I get the Blue Screen Of Death. (Questioning recent hardware changes.)
So, since the machines are both the same model, I assume that either:
1. The WIFI cards are not the same (I need to take the palm rests off and look);
2. I installed Middleton's BIOS on the one but not on the back up;
3. There is something in BIOS or in W7 Home Premium 64-bit which recognizes and requires the same Machine Code for the motherboard for it to boot properly?
4. Any other suggestions?
Finally, how can I tell if I installed Middleton's BIOS on the back up X61?
Can I reinstall it without problems if I cannot tell?
And finally, where can I find the current Middleton's BIOS for the X61?
Thanks in advance for your help.