https://www.ebay.com/itm/Bluetooth-4-0- ... 2749.l2649
And brought it home and took the keyboard out and the palm rest off the X61 2.40GHz and was looking around for the card and, dang!, I couldn't find it. And then I thought, I wonder if it is under the screen bezel, so looked it up on the X61 Hardware Maintenance Manual ("HWMM") and sure enough it is situated at the bottom of the screen under the bezel where it says "X61 lenovo" on the bezel.
The HMMM says something like "removing the bezel may be difficult due to the adhesive." So I stopped and put the machine back together and am now writing this.
1. Will trying to remove the bezel cause any damage to the screen?
2. Can I reuse the bezel with the old adhesive?
3. Do you think this card will provide better performance? (I am using Bluetooth quite a bit now to stream audio (talk radio and/or music and/or amazon movie audio - from the T61p DVI to HDMI on the dock) to my stereo system. So I would like to see if I could get more range or more penetration through objects with a modern BT card.
BTW, the BT on the Intel AC 7620 HMWG.R wifi half card does not operate (at least when the BT daughter card remains installed).
... It should suffice to just remove the 3 screws around the left bottom corner of the bezel, and lift that left corner gently to get at the BT module.
3) No idea, check it before you put the bezel back on.
Check out The Boardroom for Parts, Mods and Other Services.
I couldn't razor blade separate the bezel where the function lights are so I didn't. I just raised the "X61 lenovo" area of the bezel and removed the old and slipped in the new Bluetooth Daughter Card and then stuck the palm rest and keyboard on without screws and then plugged it in and prayed "No 1803 error, no 1803..."
And the new BT daughter card works!
I had to re-recognize the devices that I pair to, but it works!
Now to put all the screws back...
BTW, to get one device to work, I did have to unplug the power from a BT receiver on that device and then remove device the from "Windows 10 Settings, Bluetooth & other devices" and then plug in the power on the device, push the pairing button, then "Add devices" in "Windows 10 Settings, Bluetooth & other devices," but it works fine now.
- Similar Topics
- Last post
Who is online
Users browsing this forum: No registered users and 5 guests