How to eliminate the high-pitched noise of X60/s

X60/X61 series specific matters only.
Post Reply
Message
Author
Kurt
Posts: 14
Joined: Sun Mar 20, 2005 11:25 am

How to eliminate the high-pitched noise of X60/s

#1 Post by Kurt » Wed May 24, 2006 4:33 am

I hope this tip will help some of the X60/s users who are being annoyed at the high-pitched noise. However, I'm not sure how much difference will this configuration make in the battery life.

1. Turn on your X60/s. And press F1 when the ThinkPad logo shows up on the screen to enter the BIOS setup.

2. Select Configuration => Power => CPU => CPU Power Management

3. Change the status of CPU Power Manaement from "Automatic" to "Disable."

4. Save and Exit.

5. Reboot.

6. Then you'll no longer hear the high-pitched noise.

surg
Freshman Member
Posts: 55
Joined: Fri May 19, 2006 1:41 pm
Location: Bruxelles

#2 Post by surg » Wed May 24, 2006 4:53 am

To my taste that is bad remedy.
You will have to deal with heat and low battery life.

Interesting fact is, that oviously only some X60s show that kind of noise.
When idle I can hear just the hardrive spinning.

truefalse
Posts: 16
Joined: Sat May 20, 2006 12:58 pm

#3 Post by truefalse » Sat May 27, 2006 5:47 am

as we did some test the high pitch noise is present when you have one USB mouse device connected, and will gone if you attach a second usb device like an usb pendrive or HDD

So the workaround carry a pendrive in your pocket until IBM/lenovo fixes it (but tell you the truth they did not reply my email ) :cry: :cry:

trentblase
Sophomore Member
Posts: 148
Joined: Mon Apr 17, 2006 7:56 pm
Location: SF Bay Area

#4 Post by trentblase » Sun May 28, 2006 9:24 pm

I believe Lenovo released a bios fix for this a few days ago. For some reason, the update utility has missed quite a few updates that you can find on the web.
Thinkpad X60s 1702-3QU
All system updates installed

Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Thinkpad X6x Series incl. X6x Tablet”

Who is online

Users browsing this forum: No registered users and 4 guests