Page 1 of 1
screen?
Posted: Tue Dec 19, 2006 11:58 am
by jamse
like my x60s looks kinda of brighter on the bottom and the right and left edges.... is that normal? i cant tell if there are windows opened, but if the screen saver kicks in i think its noticiable
Posted: Sun Dec 24, 2006 10:50 am
by tallman
jamse, seems you have one of the few models with the extralight lcd. I have one on order myself so I cannot confirm if it has the same issue. I did have a Dell once, that suffered from Light leakage and hopefully this screen isn't of the same quality. I don't think it was the actual lcd that caused this, but the inverter used for it. If possible, could you take pics of it with a black background up.
Thanks
Happy Holidays
Posted: Sun Dec 24, 2006 11:25 am
by CHoPSTICK89
I was told that it was normal by an IBM tech. Its how the backlighting is setup
Posted: Sun Dec 24, 2006 12:40 pm
by tallman
Yes, some light leakage is normal. Backlighting is not setup and I wouldn't listen to what a tech says to be accurate, I'm one myself. None of our work T series exhibits these issues. The Dell I had glowed half way up the screen which showed how inferior the lcd/inverter was. My sony's screen is as bright as the sun and has no light issues. That's why I'd like to see pictures for myself and make the determination if it's "normal".
Posted: Sun Dec 24, 2006 2:33 pm
by pianowizard
tallman wrote:jamse, seems you have one of the few models with the extralight lcd.
Ah, I forgot that there are two kinds of X60s displays. I told the OP last week that my X60s doesn't have this issue, but my X60s has the conventional (i.e. heavier and dimmer) screen.
Posted: Sun Dec 24, 2006 10:32 pm
by jamse
Posted: Sun Dec 24, 2006 10:42 pm
by pianowizard
Thanks for the photos. My X60s definitely doesn't have this problem.
Posted: Sun Dec 24, 2006 10:49 pm
by jamse
so not normal
Posted: Sun Dec 24, 2006 10:51 pm
by madana
There is a considerable amount of light leakage on my screen in the form of dark stripes and shades right in the middle. Do you think it qualifies for a replacement?
Posted: Sun Dec 24, 2006 10:53 pm
by pianowizard
madana wrote:Do you think it qualifies for a replacement?
If possible, please show us a photo.
Posted: Tue Dec 26, 2006 1:02 am
by tallman
Thanks Jamse. Is that bottom picture taken straight on or angled? The pics may be falsely magnifying your problem, but if the pics do show what your screen actually looks like, that's pretty bad. I'm sure you won't be working with a black background but you seemed to have noticed it enough to ask. If it's distracting you, I'd call Lenovo. My gf's will be here Thursday and will let you know what it looks like.
Model 1702-7CU, which should be the samd UL lcd as yours.
Posted: Wed Dec 27, 2006 10:21 am
by madana
pianowizard wrote:madana wrote:Do you think it qualifies for a replacement?
If possible, please show us a photo.
Sorry, Pianowizard, I do not have a camera on me here. However, I doubt it would have done a good job even if i had one.
Posted: Fri Dec 29, 2006 5:36 pm
by EOMtp
jamse wrote:so not normal
Not true; actually, your pictures show a perfectly normal Ultralight XGA screen. All the UL XGA screens are exactly like yours -- the "light leakage" at the bottom of all those screens is exactly the same as on yours, and it is the result of how the back light was designed to fit in those panels ... Think of it as a feature, not a problem!
Posted: Sun Dec 31, 2006 2:42 pm
by tallman
sorry for the lateness, just busy. Anyway, did spend some time focusing on the screen and I've found no issues. It does show bottom light looking down from above, but as you move into a "heads on" view, it's fine. This is with the highest brightness and a black background. It does have a poor vertical viewing distance, but looking at the reviews for a standard x60 screen, they all appear that way. I give the UL screen a thumbs up.
If it helps, the part # of my lcd is 13N7091 with a fru of 13N7092, which I believe is a Toshba. I don't currently have a camera, but if pics would help anyone wanting to make a decison, let me know.
Posted: Wed Jan 03, 2007 1:13 am
by jamse
i wish someone would have told me this earlier :/
cause i sent it back and there wont be any instock until 10th-15th on jan
